MS8 chassis MS9 tube.
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
MS8 chassis MS9 tube.
Hi y'all,
I got a cab for nowt, but the MS8 had terrible screen burn. There's a prize if you can name the game - I must concede, I'm stumped
I bought an MS9 tube from Mo for £40 with minimal burn with the intention of swapping out the tubes, and if it didn't work, then I could either sell the MS9 tube, or buy an MS9 chassis.
So it's out with the old
and discharge the monitor
and in with the new
Not the most impressive result, but to be honest, I expected worse.
After a chat with Craig @ giz10p.co.uk on mIRC, I turned down the LOPT which got rid of the retrace lines, and had a play about until I found the pincushion adjustment. I also connected up a game with a crosshatch.
Et voila!!
Still a little out on the trapezoid adjustment, and although noticeable ingame
it's certainly preferable to the horrendous burn that I started out with.
Props to Richy for the cab, and to Craig @ giz10p.co.uk for continuing to patiently put up with my irritating n00b questions.
I'm going to say RESULT!!! as I'm about 85% happy with the outcome.
Cheers y'all,
a_m.
I got a cab for nowt, but the MS8 had terrible screen burn. There's a prize if you can name the game - I must concede, I'm stumped
I bought an MS9 tube from Mo for £40 with minimal burn with the intention of swapping out the tubes, and if it didn't work, then I could either sell the MS9 tube, or buy an MS9 chassis.
So it's out with the old
and discharge the monitor
and in with the new
Not the most impressive result, but to be honest, I expected worse.
After a chat with Craig @ giz10p.co.uk on mIRC, I turned down the LOPT which got rid of the retrace lines, and had a play about until I found the pincushion adjustment. I also connected up a game with a crosshatch.
Et voila!!
Still a little out on the trapezoid adjustment, and although noticeable ingame
it's certainly preferable to the horrendous burn that I started out with.
Props to Richy for the cab, and to Craig @ giz10p.co.uk for continuing to patiently put up with my irritating n00b questions.
I'm going to say RESULT!!! as I'm about 85% happy with the outcome.
Cheers y'all,
a_m.
-
- Please Continue...
- Posts: 309
- Joined: August 20th, 2008, 11:46 am
- Location: OFFLINE
Re: MS8 chassis MS9 tube.
i've had to do similar in the past, as has Craig, we both had differing results, where I had hardly any adjustments to make on the chassis pots, Craig had some serious width issues IIRC
Wei Ya chassis works on both MS8 and MS9 tubes
incidentally, I noticed an influx of recent cabinets that appeared to have had monitors swapped out, "New Astro City" with an MS8 and various Astro 1st gens with MS9's. how else can anyone explain an older cab having a newer monitor and a newer cab having an older monitor installed.
btw, Ralph, I have an MS9 tube down here if you want it, some burn but not as bad as the one you show above, I have a few Sega monitor frames kicking around too
edit: I know of someone who may be willing to part with one of his spare MS9 chassis too
Wei Ya chassis works on both MS8 and MS9 tubes
incidentally, I noticed an influx of recent cabinets that appeared to have had monitors swapped out, "New Astro City" with an MS8 and various Astro 1st gens with MS9's. how else can anyone explain an older cab having a newer monitor and a newer cab having an older monitor installed.
btw, Ralph, I have an MS9 tube down here if you want it, some burn but not as bad as the one you show above, I have a few Sega monitor frames kicking around too
edit: I know of someone who may be willing to part with one of his spare MS9 chassis too
Re: MS8 chassis MS9 tube.
metal slug x neo geo whats my prize
- TheChugnut
- Posts: 36
- Joined: August 17th, 2008, 11:24 pm
- Location: Surrey
- eBay: thechugnut
Re: MS8 chassis MS9 tube.
I got Metal Slug X burnt into my MS8 too.
Better than being something gay... like Legend of Success Joe.
Better than being something gay... like Legend of Success Joe.
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: MS8 chassis MS9 tube.
Hi d00d, you're free to come along and collect the old tube nowpoolchamp wrote:metal slug x neo geo whats my prize
- richy13
- Ming the Merciless
- Posts: 792
- Joined: July 25th, 2009, 12:38 am
- Location: UK
- eBay: ...
Re: MS8 chassis MS9 tube.
LOL:);)
- Alec
- Please Continue...
- Posts: 76
- Joined: September 5th, 2008, 12:08 am
- Location: CA, USA
Re: MS8 chassis MS9 tube.
If a cabinet ran Legend of Success Joe for that long, it would probably be in pretty good shape from going unplayed for so many years.TheChugnut wrote:I got Metal Slug X burnt into my MS8 too.
Better than being something gay... like Legend of Success Joe.
- dmauro
- Please Continue...
- Posts: 384
- Joined: August 28th, 2008, 4:15 pm
- Location: Brooklyn, NY
Re: MS8 chassis MS9 tube.
Could someone please post more explicit instructions on doing a chassis swap. There used to be one on killer cabs and I didn't save it. I'm going to be swapping my MS8 out for a Wei Ya tri-sync and I have no idea what I'm doing and I don't want to kill myself. Thanks to anyone that can guide me through this.
- Stv
- Please Continue...
- Posts: 348
- Joined: August 24th, 2008, 5:47 pm
- Location: Tokyo - Japan
- Initials: stv
Re: MS8 chassis MS9 tube.
same problem here. really drastic width issues with MS8 chassis on a MS9 tubeMr-Megalo wrote:Craig had some serious width issues IIRC
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: MS8 chassis MS9 tube.
Craig / Ordyne commented on this. AFAIK the Wei-ya chassis he sells are modified (by Craig) to fix this issue.
No idea how he does it though, but it’s the same with all MS8 monitors.
No idea how he does it though, but it’s the same with all MS8 monitors.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 chassis MS9 tube.
i swapped out a ms8-29fan with a rodotron 666a chassis and had no issues
maybe the wei ya has less range on the vertical or horizontal deflection
i know that a 26" nanao is even more obscure
maybe the wei ya has less range on the vertical or horizontal deflection
i know that a 26" nanao is even more obscure