Naomi 29e31s bezel part number?

For monitor related issues
Post Reply
User avatar
FrancoB
J+ member of the year finalist!
Posts: 4567
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Naomi 29e31s bezel part number?

Post by FrancoB » November 24th, 2009, 9:29 am

I need a bezel for one of my Naomis and its 29e31s monitor.

I have two bezels here but neither of them fit. One is the PFX bezel (no suprise there!) and the other one doesn't fit either. How many types of Naomi bezels are there?

Anywho's, does any one know the part number for the 29e31s bezel? Penrhos may have one for me but he wants to know the part number.

User avatar
cools
Armed Police Buttrider
Posts: 12546
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Naomi 29e31s bezel part number?

Post by cools » November 24th, 2009, 9:36 am

FrancoB wrote:How many types of Naomi bezels are there?
Three.

It's whatever part number you don't have :)
Image

User avatar
andygeezer
Blue Skies Ahead
Posts: 2501
Joined: August 24th, 2008, 12:25 pm
Location: Cambridge, UK
Initials: AGS

Re: Naomi 29e31s bezel part number?

Post by andygeezer » November 24th, 2009, 9:49 am

noa-1502-01, noa-1502-02 and noa-1502-03

01=nanao
02=sanwa
03=pure flat
Say hello to my little friend...
Image

User avatar
FrancoB
J+ member of the year finalist!
Posts: 4567
Joined: June 8th, 2009, 10:42 pm
Location: Buckinghamshire
eBay: francosquashking
Initials: FRN

Re: Naomi 29e31s bezel part number?

Post by FrancoB » November 24th, 2009, 10:23 am

Cheers guys :thumbup:

MrMikeLU
Posts: 36
Joined: October 21st, 2009, 6:16 pm
Location:

Re: Naomi 29e31s bezel part number?

Post by MrMikeLU » November 30th, 2009, 10:24 pm

the 29e31 bezel is also for the 2930/31/34 nanaos so isnt it also a nanao bezel ;-).

User avatar
grantspain
Tech Head
Posts: 4384
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Naomi 29e31s bezel part number?

Post by grantspain » November 30th, 2009, 10:26 pm

MrMikeLU wrote:the 29e31 bezel is also for the 2930/31/34 nanaos so isnt it also a nanao bezel ;-).
the sanwa 29e31s is a semi flat crt whereas the nanao's are all curved crt

User avatar
zorahk
AO Awards 2009 Winner
Posts: 511
Joined: September 9th, 2009, 1:48 am
Location:

Re: Naomi 29e31s bezel part number?

Post by zorahk » November 30th, 2009, 10:41 pm

Aren't the 30/31/34 curved less than the 8/9/32 though?
хорошо!

User avatar
grantspain
Tech Head
Posts: 4384
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Naomi 29e31s bezel part number?

Post by grantspain » November 30th, 2009, 10:46 pm

zorahk wrote:Aren't the 30/31/34 curved less than the 8/9/32 though?
they all look exactly the same to me

User avatar
cools
Armed Police Buttrider
Posts: 12546
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Naomi 29e31s bezel part number?

Post by cools » November 30th, 2009, 11:05 pm

The 30 and 31 definitely have a different curvature to the 8 and 9
Image

User avatar
grantspain
Tech Head
Posts: 4384
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Naomi 29e31s bezel part number?

Post by grantspain » November 30th, 2009, 11:08 pm

i know that the 32/34 are the same as ms9 as i put a naomi bezel from a 32 onto a ms9 to check

MrMikeLU
Posts: 36
Joined: October 21st, 2009, 6:16 pm
Location:

Re: Naomi 29e31s bezel part number?

Post by MrMikeLU » December 1st, 2009, 9:57 pm

the sanwa has th same curve like the 30/31/34. and the pfx has sidecompression ;)

User avatar
zorahk
AO Awards 2009 Winner
Posts: 511
Joined: September 9th, 2009, 1:48 am
Location:

Re: Naomi 29e31s bezel part number?

Post by zorahk » December 2nd, 2009, 3:24 am

The MS2932 I know for a fact has the same curvature as MS9/MS8 monitors.

The MS2930, 31, and 34 are less curved than those, however I do not believe they are as semi-flat as the sanwa is.

http://www.kiban.ath.cx/kyoutai/blast.htm"

if you notice the monitor picture, you will see what I'm talking about. I think the 30/31/34 are likely in between the MS9 and the Sanwa 29e31s.
хорошо!

MrMikeLU
Posts: 36
Joined: October 21st, 2009, 6:16 pm
Location:

Re: Naomi 29e31s bezel part number?

Post by MrMikeLU » December 3rd, 2009, 11:27 pm

I have one bezel for my 29e31and 2934.

User avatar
nem
Posts: 1366
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Naomi 29e31s bezel part number?

Post by nem » December 4th, 2018, 12:34 pm

For reference, I made this pic:

noa_bezels.jpg

NOA-1502-01 for MS-2932 and MS8-29 / MS9-29
NOA-1502-02 for MS-2930 / 2931 / 2933 / 2934 and Sanwa 29E31S
NOA-1502-03 for Toshiba PF D29C051 and Sanwa 29PFX

There might be others, but those are the most common ones.

EDIT: corrected the part numbers
Last edited by nem on April 21st, 2019, 1:43 pm, edited 1 time in total.

initiatedo
Posts: 1
Joined: December 15th, 2018, 6:07 am
Location: USA
eBay: N/A

Re: Naomi 29e31s bezel part number?

Post by initiatedo » December 15th, 2018, 6:09 am

zorahk wrote:
December 2nd, 2009, 3:24 am
The MS2932 I know for a fact has the same curvature as MS9/MS8 monitors.

The MS2930, 31, and 34 are less curved than those, however I do not believe they are as semi-flat as the sanwa is.

http://www.kiban.ath.cx/kyoutai/blast.htm"

if you notice the monitor picture, you will see what I'm talking about. I think the 30/31/34 are likely in between the MS9 and the Sanwa 29e31s.
Thanks for the link.

User avatar
mukurop
Posts: 33
Joined: September 19th, 2008, 11:00 pm
Location: Italy
eBay: mukuro_w

Re: Naomi 29e31s bezel part number?

Post by mukurop » December 24th, 2018, 2:56 am

I Have the bezel wih complete White Shell in good cindition, let me know if you strll need, I Have also the sanwa 29e31s picture tube.

CitrikElektrik
Posts: 17
Joined: October 26th, 2015, 1:12 pm
Location: Villemomble - France

Re: Naomi 29e31s bezel part number?

Post by CitrikElektrik » April 21st, 2019, 10:43 am

Hi guys,

Just for you to know : I have a screen cover NOA-1501-02 with infrared emitters from a gun cab since months. I performed my tests and cabling on my NNC but I planned to acquire a Naomi with the proper screen. I just find a Naomi with a 29e31s combo that should have suited well with this screen cover based on the informations I read here.

Unfortunatly, that did not match at all. I replaced the screen with a ms2932 combo then (the last combinaison I did not try) and I was able to close the cab. BUT I had to remove the spacers to do that and this is a crucial information on this thread : the spacers are not the same for each screen. The NNC flat screen has small spacers while the Shanghai Novel has huge 19mm spacers.

I have a little gap on the corners of the screen but it is very discreet and my new screen is awesome. :awe:

The Tosh PF and Sanwa PFX are flat. The MS-2932 is very curvy on both axis. The MS-2930, 31, 33 and 34 seem to be curvy on 1 axis only. The Shanghai Novel of the 29e31s combo is moderatly curvated on both axis and I think it is a dedicated screen cover :

Image

I hope this will help.

User avatar
nem
Posts: 1366
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Naomi 29e31s bezel part number?

Post by nem » April 21st, 2019, 1:34 pm

I don't understand. What combination did you have problems with? A Shanghai Novel 29E31S with a NOA-1502-02 bezel? I have that combination here, it's a perfect fit.

You're right about the spacers, they are indeed different size for the two tubes.

CitrikElektrik
Posts: 17
Joined: October 26th, 2015, 1:12 pm
Location: Villemomble - France

Re: Naomi 29e31s bezel part number?

Post by CitrikElektrik » April 22nd, 2019, 9:50 am

It didn't fit for me with the 02 bezel and the Shanghai Novel. Did you used the 19mm spacers ? The bezel I have with the SN is very narrow on the top and bottom. I did not check the curvature on the other side. Maybe it is similar (and thus it would fit with smaller spacers) but this bezel is a different model without any code on it's own.

Post Reply