MS8 / MS9 & NAC monitor set up query
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
MS8 / MS9 & NAC monitor set up query
Right, I have an MS8 29 monitor, Flazh has supplied me with a MS9 chassis and I am trying to install both into a New Astro City. Prior to purchase I was told that the chassis could be used with MS8 & MS9 tubes, which I am sure it could, but silly me I thought that the cabling would be the same.
So, how to fit this gimp together?
I'll take images once I have read my son his bedtime story (James & the giant peach) and walked my daughter's dog.
So, how to fit this gimp together?
I'll take images once I have read my son his bedtime story (James & the giant peach) and walked my daughter's dog.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 / MS9 & NAC monitor set up query
and tomorrow night's story is "Parris and the giant HT arc"
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
I'll have to leave images until tomorrow
@ Grant - potentially possible lol - I hate working with monitors.
@ Grant - potentially possible lol - I hate working with monitors.
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
2) This is the monitor connector, what chassis was meant to be used on this tube?
3) This is the main connector on the tube, which is the same as the tubes on the Egret units, but they don't have the connector above. Tube is MS8
4) Here's the chassis. MS9
Thanks in advance. The official Sega manual I have suggests that the chassis I have is ideal, but perhaps the loom I have bought is from a different version.
3) This is the main connector on the tube, which is the same as the tubes on the Egret units, but they don't have the connector above. Tube is MS8
4) Here's the chassis. MS9
Thanks in advance. The official Sega manual I have suggests that the chassis I have is ideal, but perhaps the loom I have bought is from a different version.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 / MS9 & NAC monitor set up query
the plug is the standard sega type plug that has connections for video/power and degauss switch
yoke plug is different,the vertical plug has a smaller pin diameter on the ms9
what you really need is the female plug that connects to the plug in the first photo otherwise you will need to do quite alot of wiring mods
yoke plug is different,the vertical plug has a smaller pin diameter on the ms9
what you really need is the female plug that connects to the plug in the first photo otherwise you will need to do quite alot of wiring mods
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
1) Yeah, I thought it looked almost exactly like the connector found on the Naomi cabinet.grantspain wrote:the plug is the standard sega type plug that has connections for video/power and degauss switch
yoke plug is different,the vertical plug has a smaller pin diameter on the ms9
what you really need is the female plug that connects to the plug in the first photo otherwise you will need to do quite alot of wiring mods
2) Ah, pants...
3) I'll have to ask around then, see what is on offer, but it might have to wait until next month now. Gawd, do I have to sit looking at a blank screen for a couple of weeks
Thanks Grant!
- tetsujin
- Hello, I say
- Posts: 1949
- Joined: September 8th, 2008, 4:33 pm
- Location: Cheshire
- eBay: kukki_86
- Initials: AC.
Re: MS8 / MS9 & NAC monitor set up query
Parris,
this is the std connector style on the ASTRO cabs, all mine (x3) have been like that, Dont change the wirning of the cab to suit, change the wiring of the monitor
Thats all I can help with though
LOL Cats... stupid cats
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
Right, does anyone have the wiring diagram of what I'd need to do / how to connect the current chassis / monitor to that connector? I'd appreciate it as it's the LAST job on the list.
Thanks Adam!
Thanks Adam!
-
- Posts: 72
- Joined: October 9th, 2008, 9:09 am
- Location: Barnsley, South Yorkshire
Re: MS8 / MS9 & NAC monitor set up query
IIRR you cant run and MS9 chassis on an MS8 scan coil without getting some major problems..
IIRR Ralph tried this and could never get it right..
The scan coils are similar but not the same, they wont damage the chassis but you will have issues... If someone knows better please jump in..
IIRR Ralph tried this and could never get it right..
The scan coils are similar but not the same, they wont damage the chassis but you will have issues... If someone knows better please jump in..
-
- Posts: 72
- Joined: October 9th, 2008, 9:09 am
- Location: Barnsley, South Yorkshire
Re: MS8 / MS9 & NAC monitor set up query
Oh and where is the plastic carrier for the chassis?
-
- The ¥100 Ashtray
- Posts: 1008
- Joined: August 18th, 2008, 8:28 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
Right, damn it, I was informed that the chassis was interchangeable and the chassis is as you see it, that's what I got for my £55 inc P&P.
If someone wants a working MS9 chassis for £55 inc P&P in the UK then please drop me a line, I am purchasing a different chassis to avoid all the hassle or messing around with changing the wiring and tampering with anything on the monitor (as they truly aren't my forte! Fixed a few of them, but never happy working on them).
Cheers Craig!
If someone wants a working MS9 chassis for £55 inc P&P in the UK then please drop me a line, I am purchasing a different chassis to avoid all the hassle or messing around with changing the wiring and tampering with anything on the monitor (as they truly aren't my forte! Fixed a few of them, but never happy working on them).
Cheers Craig!
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
can one use that chassis on 2930/31/34 tube?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 / MS9 & NAC monitor set up query
nope,the nanao ms2930/31/32/34 all have a svga yoke of around 0.195mh-only chassis that fits on that is a rodotron 666b1 and the wei ya 3129bMrMikeLU wrote:can one use that chassis on 2930/31/34 tube?
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
since one can use 2930/31/34 chassis on each other and not the 32, are you sure about the 666b1 for the 2932?
-
- Posts: 72
- Joined: October 9th, 2008, 9:09 am
- Location: Barnsley, South Yorkshire
Re: MS8 / MS9 & NAC monitor set up query
The scan coil on the 2932 ia slightly different to the 30/31/34, I've never tried the B1 on it but I could do when I get a spare hour
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 / MS9 & NAC monitor set up query
rodotron 666b1 chassis running on nanao ms2932 crt/yoke in a naomi cab
31khz 15khz 24khz
31khz 15khz 24khz
You do not have the required permissions to view the files attached to this post.
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: MS8 / MS9 & NAC monitor set up query
nice to know that.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Re: MS8 / MS9 & NAC monitor set up query
that's an unbelievable nice 15 khz picture for a rodotron!
- DandySephy
- Please Continue...
- Posts: 1475
- Joined: October 7th, 2008, 4:54 am
- Location: Canterbury, UK
- Initials: SEP
Re: MS8 / MS9 & NAC monitor set up query
Why the hell isn't mine like that!Wurstkopp wrote:that's an unbelievable nice 15 khz picture for a rodotron!
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: MS8 / MS9 & NAC monitor set up query
Expert tweakingDandy_Sephy wrote:Why the hell isn't mine like that!Wurstkopp wrote:that's an unbelievable nice 15 khz picture for a rodotron!