MS8 / MS9 & NAC monitor set up query

[DandySephy]

that's an unbelievable nice 15 khz picture for a rodotron!

Why the hell isn't mine like that!

Expert tweaking

Video guide please

[grantspain]

ms2932 replacement 012.jpg

ms2932 replacement 017.jpg

ms2932 replacement 003.jpg

ignore the convergence issue with blue as that was present on the crt witht the nanao-needs a mod with a convergence strip really

[Ordyne]

Grant I thought you had problesm with the C3129B on the MS2932?

[Rossyra]

ignore the convergence issue with blue as that was present on the crt witht the nanao-needs a mod with a convergence strip really

My MS2932 has exactly the same convergence issue in the corners, maybe I should give some magnetic tape a go. I'm **** scared of electromacuting mashelf on the yoke coil though. The rest of the geometry is perfect thanks to your help in that other thread Grant

[neokoen]

scared of electromacuting mashelf

Sound like you already did

[Rossyra]

[grantspain]

Grant I thought you had problesm with the C3129B on the MS2932?

i sold the chassis on to someone who got more compression than i did,there was a very small amount of compression on the left and quite a bit on the right at 15khz but 24khz and 31khz were fine on my set up-as you can see
the person that bought the chassis was getting more problems but i do not know why