Hey Guys
I have the Blue EX machine and I have an intermittent problem with the vertical sync going out. It seems to not hold and comes and goes.
Could this be a cap going bad? Does anyone know what the Serial number would be on this Nanao monitor. It's in service so I haven't double checked it.
Thanks for any help.
John T.
Help with my Namco Exceleena monitor
-
- Please Continue...
- Posts: 4
- Joined: June 13th, 2009, 7:51 am
- Location: San Jose, CA
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Help with my Namco Exceleena monitor
i had the same probelm recently with a nanao ms8-26,i found a few caps leaky
i will check the positions when i return to work on tuesday but they are all near the video input plug and very close to a large resistor which i believe due to heat causes the caps to go after time
the other possibility is the sync module going faulty
i will check the positions when i return to work on tuesday but they are all near the video input plug and very close to a large resistor which i believe due to heat causes the caps to go after time
the other possibility is the sync module going faulty
-
- Please Continue...
- Posts: 4
- Joined: June 13th, 2009, 7:51 am
- Location: San Jose, CA
Re: Help with my Namco Exceleena monitor
Thanks for any assistance! I'll probably be able to get the serial number tomorrow.