Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Hey all - so my **** **** week just turned ****
Just unwrapped the new cab Martin delivered and the monitor seems dead. Seller assures me it worked before despatch and cab was well wrapped.
Powering on the cab with no pcb - lights light up but nothing else. Connected a Jamma Mister and lights up, jamma adapter shows 5.04 being drawn but again no picture.
Taken some pics of the monitor:
Just unwrapped the new cab Martin delivered and the monitor seems dead. Seller assures me it worked before despatch and cab was well wrapped.
Powering on the cab with no pcb - lights light up but nothing else. Connected a Jamma Mister and lights up, jamma adapter shows 5.04 being drawn but again no picture.
Taken some pics of the monitor:
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- sven666
- Posts: 510
- Joined: August 28th, 2008, 8:03 am
- Location: Hisingen SE
- eBay: sven-666
- Initials: JNX
- Contact:
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Chassi Power chord unplugged during shipping?
Cant see anything obvious in your pics..
Cant see anything obvious in your pics..
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Probably should of said, complete novice on monitors (well these days cabs in general!), is that easy to check without frying myself?
Should the monitor power on with no pcb attached? I thought my old cabs did but maybe Im misremembering?
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- sven666
- Posts: 510
- Joined: August 28th, 2008, 8:03 am
- Location: Hisingen SE
- eBay: sven-666
- Initials: JNX
- Contact:
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Its the black wire going from the chassi proboably plugged into the outlet on the front panel.. the screen will power on but you wont get any picture of anything if you have nothing plugged in.
Ed: having multi-mister-whatever is garbage for troubleshooting cabs, they have a million reasons for not powering up, i strongly advice to get a cheap jamma or mvs to use for testing and adjusting..
Ed: having multi-mister-whatever is garbage for troubleshooting cabs, they have a million reasons for not powering up, i strongly advice to get a cheap jamma or mvs to use for testing and adjusting..
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Found the cable, looks okay. Gonna have to find a cheap pcb or borrow one I think. Might drop Pete a line, he’s near me.
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
This one?:sven666 wrote: ↑April 8th, 2022, 7:25 pm Its the black wire going from the chassi proboably plugged into the outlet on the front panel.. the screen will power on but you wont get any picture of anything if you have nothing plugged in.
Ed: having multi-mister-whatever is garbage for troubleshooting cabs, they have a million reasons for not powering up, i strongly advice to get a cheap jamma or mvs to use for testing and adjusting..
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- Neo Gold
- Posts: 453
- Joined: October 28th, 2008, 10:25 pm
- Location: In my Garage..
- eBay: neo$gold
- Initials: N$G
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Don't worry..it'll be fine with a pcb installed...& brightness adjusted etc.
WANTED! .. Any Tatty old candy cab!.
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Fingers crossed
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
As others are saying it's likely the cab is fine, is the MiSTER known working with cabs?
Certainly with the irkenlabs one you have to do some tinkering on the desktop prior to installing in a cab https://irkenlabs.com/jamma-expander/mi ... stallation
Certainly with the irkenlabs one you have to do some tinkering on the desktop prior to installing in a cab https://irkenlabs.com/jamma-expander/mi ... stallation
- thomj
- I love Aerosmith and they look great together
- Posts: 1753
- Joined: June 13th, 2010, 12:05 am
- Location: East Yorkshire
- Initials: TWJ
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
I would double check the harness and see if it's JAMMA. I don't think they were as stock. MVS wiring is subtly different and you can end up **** the audio amp on a pcb running it in an MVS wired cab.
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Forgot about this, they're indeed not vanilla JAMMA as standard.
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
I have an mvs to jamma adapter.
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"
- ChrisBEANS
- moneyspendingexpert.com
- Posts: 860
- Joined: November 14th, 2020, 8:21 pm
- Location: A Box
- eBay: chrismartinlewis
- Initials: BNS
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
Looks a beauty!! Congrats
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
- garrz32
- Posts: 387
- Joined: January 1st, 2009, 7:41 pm
- Location: Aberdeen
- wonderbanana
- You can't polish a turd, but I can
- Posts: 1041
- Joined: January 16th, 2011, 2:57 pm
- Location: Herts, UK
Re: Just received Cab - Monitor doesn’t work (Neo Geo 25 U4)
markedkiller78 wrote:that's probably my best contribution to the forum to date "I am pluralising fanny"