Need some help about ms-2930
-
- Please Continue...
- Posts: 6
- Joined: November 14th, 2021, 2:54 am
- Location: 中国
- eBay: 909467880@qq.com
- Initials: ZZZ
Need some help about ms-2930
I don't know how to discribe the problem in English.
I know the crt is ms-2930 because of the remote board.
update:I upload a new image about it.
Last edited by huluhala on November 29th, 2021, 1:30 pm, edited 1 time in total.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Need some help about ms-2930
My guess is a magnet / magnets have fallen off from the yoke. That's some bad geometry.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: Need some help about ms-2930
Looks like vertical foldover: the top of the picture (left side in this case as the screen is mounted vertically) bends down so the top half of the circles becomes concave. Not sure why the bigger circle doesn't show the same distortion. Maybe try a tighter test pattern that covers all areas. If this is the issue there is a cap near the vertical deflection IC that is bad. If the 2930 has a LA7846 like the 2931 the cap is the one connected to pin 8:
You do not have the required permissions to view the files attached to this post.
-
- Please Continue...
- Posts: 6
- Joined: November 14th, 2021, 2:54 am
- Location: 中国
- eBay: 909467880@qq.com
- Initials: ZZZ
Re: Need some help about ms-2930
Thanks, I'll try it if I have a chance.And I upload a new image.PrincessPrinPrin wrote: ↑November 29th, 2021, 12:31 pm Looks like vertical foldover: the top of the picture (left side in this case as the screen is mounted vertically) bends down so the top half of the circles becomes concave. Not sure why the bigger circle doesn't show the same distortion. Maybe try a tighter test pattern that covers all areas. If this is the issue there is a cap near the vertical deflection IC that is bad. If the 2930 has a LA7846 like the 2931 the cap is the one connected to pin 8:
LA7846.jpg
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Need some help about ms-2930
PrincessPrinPrin wrote: ↑November 29th, 2021, 12:31 pm Looks like vertical foldover: the top of the picture (left side in this case as the screen is mounted vertically) bends down so the top half of the circles becomes concave.
Oh wow, didn't even think of that. Nice catch!
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Need some help about ms-2930
yep looks like it, la7838 on 2930 chassis but could be one of the caps causing this