I have a chassis with a first version of MTC 9000 with small white points in the screen, brilliant effect. (below a youtube video)
I tried to:
- replaced all electrolytic capacitors, total recap;
- replaced ceramic capacitor in the neck board C206;
- replaced flyback;
- tested with another tube;
- replaced transistor on the neckboard, TR201-202-203;
- checked all variable resistors on the neckboard;
- replaced RV7 on main board, brightness preset;
- removed fuse 2 then disabled degauss circuit and removed degauss cable;
I checked the main points and seems to be ok:
TP10 - 133.4
TP12 - 11.9
TP13 - 26.9
TP 1 - 24.8
SP11 - 202.9
G2 - 352.2 (ground on the NECK)
I tried to connect a direct ground cable between big heatsink and power socket and there is a little decreases of defect.
Maybe a bad component connected with ground side?
Please, what i can check? i don't know i can do.
In attachment the scheme of chassis and the video issue.
Hantarex MTC 9000 small points maybe missing ground
-
- Please Continue...
- Posts: 2
- Joined: November 15th, 2021, 10:24 am
- Location: Italy
- eBay: shellboy11
Hantarex MTC 9000 small points maybe missing ground
You do not have the required permissions to view the files attached to this post.