NNC Tosh CRT Focus / Sharpness
- Moonwalker
- Posts: 247
- Joined: October 7th, 2015, 10:03 pm
- Location: Cologne, Germany
- eBay: Glmorgenstern
- Initials: TOA
NNC Tosh CRT Focus / Sharpness
Hi guys,
I was wondering where I can find the Focus / Sharpness pot or settings. Extended Remote board is installed.
Thanks!
I was wondering where I can find the Focus / Sharpness pot or settings. Extended Remote board is installed.
Thanks!
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: NNC Tosh CRT Focus / Sharpness
It the top pot directly on the flyback.
You do not have the required permissions to view the files attached to this post.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: NNC Tosh CRT Focus / Sharpness
And the other is on the neckboard.
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: NNC Tosh CRT Focus / Sharpness
Does the one on the neckboard actually do something?
I get no response on my PD1843 with this pot.
I get no response on my PD1843 with this pot.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: NNC Tosh CRT Focus / Sharpness
It adjusts the voltage of grid 4 (while the pot on the flyback adjusts the voltage of grid 3). It should have an effect in off-center areas. It only works on the original Toshiba tubes.
- Moonwalker
- Posts: 247
- Joined: October 7th, 2015, 10:03 pm
- Location: Cologne, Germany
- eBay: Glmorgenstern
- Initials: TOA
Re: NNC Tosh CRT Focus / Sharpness
Great, thanks a lot!
Another thing I always was unsure about, what is the 3,3 V pot actually for?
Another thing I always was unsure about, what is the 3,3 V pot actually for?
-
- Posts: 15
- Joined: January 31st, 2020, 6:44 am
- Location: Paris, France
- eBay: dash-ti
- Initials: LGK
Re: NNC Tosh CRT Focus / Sharpness
You just made my day with this one.
Never thought that it was safe to touch this one since it was glued on my PD1843.
By the way neither the flyback midldle pot F2, nor the neckboard focus pot seemed to do anything when I adjusted them to fix my blurry off-center areas issue in the past.
Now that I have followed your advice about F1 pot and have adjusted the main focus it seems that the neckboard pot allows a better overall balance of the new focus between all off-centers areas. But the effect seems so subtle that I can’t say if this is real or just my mind
Strangly the middle F2 pot on the flyback still seems to do nothing at all on my chassi and a Toshiba tube.
Focus seems perfect or real close now anyway.
Thanks a lot for sharing the knowledge Buddy C
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: NNC Tosh CRT Focus / Sharpness
I aim to please
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
-
- Posts: 15
- Joined: January 31st, 2020, 6:44 am
- Location: Paris, France
- eBay: dash-ti
- Initials: LGK