Hi all,
I have just recapped my MS-2930 chassis, upon setting the chassis up on a tube for testing, I made a dumb mistake, I forgot to plug the remote board!!
The chassis was doing a coupe relay noises but nothing further, once I plugged in the remote, the chassis would not show any signs of life.
I have not done further diagnostics other than trying 15K and 31K, changing the dips.
I was wondering if anyone has heard of similar scenarios and what components get damaged if any?
Or maybe the issue was introduced by a mistake during recapping and not plugging it in without the remote
Nanao MS-2930 turned on without the remote. Derp
-
- Please Continue...
- Posts: 18
- Joined: January 30th, 2019, 1:40 pm
- Location: Australia
- eBay: thlecomte
- Initials: LUD
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Nanao MS-2930 turned on without the remote. Derp
it will be fine, just set everything correctly and plug in the remote
-
- Please Continue...
- Posts: 18
- Joined: January 30th, 2019, 1:40 pm
- Location: Australia
- eBay: thlecomte
- Initials: LUD
Re: Nanao MS-2930 turned on without the remote. Derp
Thanks for confirming that mate, just getting back into it now.grantspain wrote: ↑May 7th, 2021, 5:20 pm it will be fine, just set everything correctly and plug in the remote