Howdy!
Just did a recap on a Tosh PD2367 chassis in my NNC and would like to measure B+ as safe as possible.
Got the equipment and experience to measure, but unsure on where to place the probes for the multimeter.
Please school me!
Need help on how to measure B+ on a Toshiba PD2367 chassis
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
all the digital chassis tend to 175-180v and normally read at the picofuse or safety resistor if fitted
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
Thanks Grant!
So red probe on one of the legs of the pico fuse and black probe anywhere on the chassis mount?
Somebody placed a normal fuse there one time( As you mentioned in my other tread a couple of days ago). Would this be a issue when measuring?
So red probe on one of the legs of the pico fuse and black probe anywhere on the chassis mount?
Somebody placed a normal fuse there one time( As you mentioned in my other tread a couple of days ago). Would this be a issue when measuring?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
yes red probe to fuse and black probe to metal frame, pretty sure it will be about 180vdc
the picofuse is a very quick blow type fuse, as long as they put same speed fuse and amp rating in then it will be ok
the picofuse is a very quick blow type fuse, as long as they put same speed fuse and amp rating in then it will be ok
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
Thanks again! Will give it a shot!
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
Ps. 180VDC on 31khz, but probably lower for 15khz?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
no i would expect it to be the same on digital chassis for all resolutions as they normally power the video b+ from chassis b+ and that must remain stable
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Need help on how to measure B+ on a Toshiba PD2367 chassis
Great info as always. Much appreciated!