Evening all,
So my NNC had a tube with burn, so the tube was replaced but in the meantime my chassis died, so the long story short is I now have a replacement tube and replacement chassis (same series, compatible but not identical), I'm working off my old pictures and wiring it up as before, it's all gone fine other than one cable, I can't seem to find a schematic but presumably this one is power, but as you can see it's not a direct fit,
One of the old images of my previous chassis/tube I'm working off has the cable in white instead of black, connected up as per below,
I'm thinking I can just snip the plastic in the middle of the black cable and wire it up, but I thought I'd ask here first
NNC - Replacement duo of PD2367 + A68LTF356X, wiring query
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: NNC - Replacement duo of PD2367 + A68LTF356X, wiring query
you require smaller gauge connector, its the same type as the vertical yoke connector
https://www.arcadepartsandrepair.com/st ... mm-cn1001/
https://www.arcadepartsandrepair.com/st ... ck-cn1006/
https://www.arcadepartsandrepair.com/st ... mm-cn1001/
https://www.arcadepartsandrepair.com/st ... ck-cn1006/
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
Re: NNC - Replacement duo of PD2367 + A68LTF356X, wiring query
grantspain / nem
You guys rock, thanks
You guys rock, thanks