Toshiba pd1843 connector p802

For monitor related issues
Post Reply
User avatar
sven666
Posts: 500
Joined: August 28th, 2008, 8:03 am
Location: Hisingen SE
eBay: sven-666
Initials: JNX
Contact:

Toshiba pd1843 connector p802

Post by sven666 »

..what does it do?

5 prong connector with just 1, 3 and 5 studded.. i have borh connections byt dont know what to hook it up to... anyone?
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Toshiba pd1843 connector p802

Post by nem »

I have never seen it connected to anything. I suspect it's related to the degauss coil. Do you have a mating harness for it? What does it look like?
User avatar
sven666
Posts: 500
Joined: August 28th, 2008, 8:03 am
Location: Hisingen SE
eBay: sven-666
Initials: JNX
Contact:

Re: Toshiba pd1843 connector p802

Post by sven666 »

it doesnt connect to the monitor, its to something in the cab, ive had it on several others in the past but never reflected over what it actually coneccts to..
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Toshiba pd1843 connector p802

Post by nem »

I have cabs from Sega, Namco and Konami that all have a PF. Not one cab uses that connector for anything.

Anyway, should be simple enough to figure out if you flip the chassis over and look at what it's connected to.
User avatar
sven666
Posts: 500
Joined: August 28th, 2008, 8:03 am
Location: Hisingen SE
eBay: sven-666
Initials: JNX
Contact:

Re: Toshiba pd1843 connector p802

Post by sven666 »

Well it has to do with degaussing the screen im pretty sure of, but need to know what in the cab it connects to, im rewiring an absolute mess of a cab and tons of connectors have been cut and i dont have another NNC for reference right now (all my NNCs have had this connected).

Anyone with a nnc that can trace its origin? :)
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Toshiba pd1843 connector p802

Post by nem »

I have seven or eight NNCs. I'm pretty sure none of them have it connected. I opened up one for you:

nnc_no_p802.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply