yeah sorry, its a MS8-29 tube Toshiba A68KJU96X, not the 26" Mitsubishi from Daytonas/Aeros, but the bad focus issue at the start is the same as in your 26" Mitsubishi.mukurop wrote: ↑May 25th, 2020, 9:39 am You should not try a ms8 29 or ms9 chassis on a Mitsubishi 26" due to the yoke not match.. Any way if it is not the chassis then is the tube and on my experience a tube rejuve do not any reliable results on those tubes (Both 26" mitsu and toshiba 29") so you should replace the tube ..
MS8 26SG focus issue
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: MS8 26SG focus issue
- mukurop
- Posts: 109
- Joined: September 19th, 2008, 11:00 pm
- Location: Italy
- eBay: mukuro_w
Re: MS8 26SG focus issue
Yes but on my case replacing chassis completely solved the slow focus on startup then not was the tube. Do not warry about... your tube will last more than any nasty LCDs on the market, just enjoy and in the mean time try to fnd a replacement.
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: MS8 26SG focus issue
As you said, this does not worry me too much, I can wait playing on another cab while this one heats up..I just wanted to know what may be causing this, maybe the same filth that grows within the neckboard socket pins gets to the innards of the tube.