Hi my friends,
I wanted to ask, my astro city monitor shuts down after 2 secs and an audible click. I measured at f902 the right voltage, one probe to the fuse and one to the frame monitor, is that right? And measured 94v, i adjusted the pot +B adj and changed, so i think the regulator is properly working. I've read this can be the HOT, i tried measuring it but i don't know if I'm doing right. I didn't desoldered and tried on diode mode if i could read 2 legs, the other being base. So....i don't really know what I'm doing but i would really like to get my first cab working. Anyone have advice about this?
Many thanks in advance!
Nanao ms8 29 monitor shuts down
- MostroVeneno
- Please Continue...
- Posts: 6
- Joined: July 31st, 2019, 4:02 pm
- Location: Mendoza
- eBay: carlosfernandcardon_0
- Initials: car
- MostroVeneno
- Please Continue...
- Posts: 6
- Joined: July 31st, 2019, 4:02 pm
- Location: Mendoza
- eBay: carlosfernandcardon_0
- Initials: car
Re: Nanao ms8 29 monitor shuts down
Anyone can mention why would the monitor shut down if getting proper b+ voltage at f902?
- MostroVeneno
- Please Continue...
- Posts: 6
- Joined: July 31st, 2019, 4:02 pm
- Location: Mendoza
- eBay: carlosfernandcardon_0
- Initials: car
Re: Nanao ms8 29 monitor shuts down
I swapped LA7832 from another chassis, and decreased B+ adj almost to the lowest. I got this image, and strange noise...[attachment=0]20190810_210412.jpg[/attachment]
You do not have the required permissions to view the files attached to this post.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Nanao ms8 29 monitor shuts down
you have no deflection and it looks like a bad yoke from the photo
- MostroVeneno
- Please Continue...
- Posts: 6
- Joined: July 31st, 2019, 4:02 pm
- Location: Mendoza
- eBay: carlosfernandcardon_0
- Initials: car
Re: Nanao ms8 29 monitor shuts down
Thanks @grantspain for the reply, where can i start to fix deflection problem ?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Nanao ms8 29 monitor shuts down
first you check for any cracks or broken tracks on the chassis, in particular around the flyback