For monitor related issues
4 posts • Page 1 of 1
- Posts: 4
- Joined: May 25th, 2019, 6:04 pm
- Location: Italia
- eBay: bushi82jutaijutsu
- Initials: SNT
hi everyone, my hitachi monitor suffers from a horizontal non-linearity problem. The left side of the screen is larger and the right side is smaller. I can't find a command on the panel to adjust the horizontal linearity. Has it ever happened to anyone?
May I Know What's your tube-chassis combo? If it is the original one you should have an hitachi A68lLFP27X tube + hitachi GMK-29FS3, on this chassis there isn't a linearity control pot although I have never seen this problem and I have seen many of these cabs... Maybe the tube or the chassis was swapped with an incorrect one. If its not the case then you should have an incorrect value on few caps.
- Posts: 1
- Joined: July 24th, 2019, 12:43 am
- Location: Brazil
- eBay: sonofmail18
- Initials: MAI
Is there another chassis compatible with the hitachi A68lLFP27X tube? I dont have the GMK-29FS3, and the chassis i have (Eletrocyan and Wei-ya 829H) dont work with it. Thank you.
The ms9-29 should work , just make an adapter for yoke and rgb+ac