Page 1 of 1

toei tc-hv25lmk degauss information

Posted: April 14th, 2019, 6:17 pm
by gamescollector
Hi Guys,

I have a problem with this chassis, i think that this model have a problem with automatic degauss, and i don't know where is the buttorn for the manual degaussing.

i have this connector on chassis near to degauss connector monitor

Image

any idea about i make a manual degauss


regards

Re: toei tc-hv25lmk degauss information

Posted: April 17th, 2019, 5:29 pm
by matt5cott
Lucky you, I'm working on mine ATM and I have this chassis in my MVSU4 8-)

Just been and took this pic of my degauss button on this cab,

Image

Re: toei tc-hv25lmk degauss information

Posted: September 24th, 2019, 7:58 pm
by gamescollector
Thank you for reply i press it but do not work

u can send me pictures of degauss connect on chassis ?

I try to connect here but when connect i see only one very slim line on monitor

Image


Regards

Re: toei tc-hv25lmk degauss information

Posted: September 25th, 2019, 7:41 pm
by Sunder
Thats the service.
You need to connect it next to the PTC there, aka black box looking thing.

Re: toei tc-hv25lmk degauss information

Posted: November 15th, 2019, 10:54 pm
by matt5cott
"J1" on the chassis, it's the 2 white cables popping out on the far left.

Re: toei tc-hv25lmk degauss information

Posted: November 17th, 2019, 9:06 am
by Wurstkopp
What exactly does "service" on these chassis?

Re: toei tc-hv25lmk degauss information

Posted: November 6th, 2021, 8:13 pm
by RandomRetro
matt5cott wrote: November 15th, 2019, 10:54 pm "J1" on the chassis, it's the 2 white cables popping out on the far left.
Just got this chassis in a MVS U4 that I picked up. J1 is just bridged with a jumper wire. Does this mean the chassis can function with auto degauss, or is something else going on?

Re: toei tc-hv25lmk degauss information

Posted: November 19th, 2021, 2:57 pm
by matt5cott
RandomRetro wrote: November 6th, 2021, 8:13 pm
matt5cott wrote: November 15th, 2019, 10:54 pm "J1" on the chassis, it's the 2 white cables popping out on the far left.
Just got this chassis in a MVS U4 that I picked up. J1 is just bridged with a jumper wire. Does this mean the chassis can function with auto degauss, or is something else going on?
Presumably, I've got a spare with it jumped also.

I may be able to report back on this as I'm tinkering over the next couple of weeks.

Also there are 2 horizontal width coils, so if you can't adjust it enough on the labelled one with all the controls, there's another, it took me years to realise this so I thought given you have one of these I'd better tell you just incase :lol:

Re: toei tc-hv25lmk degauss information

Posted: November 19th, 2021, 4:15 pm
by RandomRetro
Thanks @matt5cott !

Yeah I haven't messed with the coils much, but did see the two. I thought/assumed one was for 15khz and the other for 24khz.