Monitor replacement help on blast city + windy2

For monitor related issues
Forum rules
ArcadeOtaku forum introduction & rules
Post Reply
8bitforlife
Posts: 10
Joined: March 27th, 2018, 6:28 am
Location: Kapaa Kauai Hawaii
eBay: Emulat0r
Initials: RB.

Monitor replacement help on blast city + windy2

Post by 8bitforlife » January 4th, 2019, 6:18 am

ok my windy2 I got from a recent group but probably has horrible burn but can't turn it on because psu is bad and also has to be fixed so can't see how bad the burn is.

But my good friend has some monitors for me to choose from

A68KSM696X - no chassis
A68KSM696X - no chassis
A68KSM696X - 31k only chassis
73SX707YZ2 - sanwa chassis

I have a 2931 chassis and if I replace the blast I have a 2930 as a spare.

But I'm going to need a 2931 or 33 as I can't easily pull out cab to adjust. So I'm on the look out for those

Can ether of these monitors work in ether cab and work in a blast or windy2. I think the 73SX707YZ2 is vga only but can it be converted to 15hz also?

Also was told Grant is probably the person to help me on this Subject.

User avatar
grantspain
Tech Head
Posts: 4314
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor replacement help on blast city + windy2

Post by grantspain » January 4th, 2019, 9:21 am

the sanwa will be a 29es31s, you can use a weiya 3129a or rodotron 666a on these tubes
what is the chassis that is marked A68KSM696X 31khz only

8bitforlife
Posts: 10
Joined: March 27th, 2018, 6:28 am
Location: Kapaa Kauai Hawaii
eBay: Emulat0r
Initials: RB.

Re: Monitor replacement help on blast city + windy2

Post by 8bitforlife » January 4th, 2019, 8:10 pm

grantspain wrote:
January 4th, 2019, 9:21 am
the sanwa will be a 29es31s, you can use a weiya 3129a or rodotron 666a on these tubes
what is the chassis that is marked A68KSM696X 31khz only
He'll have to go down to storage to see. My friend said some op had written 31z only on it at the top.

Can I use my nanao 2931 on A68KSM696X?

User avatar
grantspain
Tech Head
Posts: 4314
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor replacement help on blast city + windy2

Post by grantspain » January 4th, 2019, 11:24 pm

8bitforlife wrote:
January 4th, 2019, 8:10 MP
grantspain wrote:
January 4th, 2019, 9:21 am
the sanwa will be a 29es31s, you can use a weiya 3129a or rodotron 666a on these tubes
what is the chassis that is marked A68KSM696X 31khz only
He'll have to go down to storage to see. My friend said some op had written 31z only on it at the top.

Can I use my nanao 2931 on A68KSM696X?
depends on the yoke tolerances, you will need an inductance meter to read the yoke-0.195mh horizontal for 2931 compatible

Post Reply