Nanao MS2932-S compatibility

For monitor related issues
Post Reply
User avatar
Benimaru
Posts: 51
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Nanao MS2932-S compatibility

Post by Benimaru »

I was able to obtain a nearly unused MS2932-S in superb condition.
My first idea was to replace the not-so-nice tube of my Blast City only to recognize, that the bezel doesn't match...
Which cabs are compatible to the 2932-S? It came from a F355 dedicated cab originaly, the Naomi Uni should also match, didn't it?
User avatar
mufunyo
Posts: 648
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Nanao MS2932-S compatibility

Post by mufunyo »

Naomi should match yeah, as well as some driving cabinets afaik. Also, there's a hack possible where you mount the Sega frame in front of the tube ears which recesses the monitor ever so slightly, meaning the bezel should now fit (albeit with a gap between it and the monitor).
Image
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem »

Well, you need the correct bezel for the Naomi (NOA-1502-01).

MS-2932 will also drop in place of a MS-8 / MS-9.
User avatar
Benimaru
Posts: 51
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru »

Thanks for the hint!
I guess it will be a pain in the **** to track such a bezel down?
Asure
Posts: 573
Joined: April 17th, 2013, 5:16 pm
Location: Netherlands
eBay: asure_nl

Re: Nanao MS2932-S compatibility

Post by Asure »

Naomi bezel can be found, there's some around.
Blast.. not so much. Backmounting and some isolation strips black foam padding with sticky sides is probably the only way.
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem »

Yeah, there's only bezel for the Blast and that fits the semi-curved (?) tubes, like the MS-2930/31/33/34 and the Sanwa 29E31S.
User avatar
Benimaru
Posts: 51
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru »

Thanks for the clarification! :)
kuze
Posts: 99
Joined: September 29th, 2013, 5:09 pm
Location:

Re: Nanao MS2932-S compatibility

Post by kuze »

Isn't the 2932 the same curvature as 2930/2931/2933/2934?
User avatar
mufunyo
Posts: 648
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Nanao MS2932-S compatibility

Post by mufunyo »

kuze wrote: October 25th, 2018, 2:29 am Isn't the 2932 the same curvature as 2930/2931/2933/2934?
No. I made the mistake of assuming that once, and experienced the practical result myself. Bezel doesn't fit and it's visibly curvier.
Image
kuze
Posts: 99
Joined: September 29th, 2013, 5:09 pm
Location:

Re: Nanao MS2932-S compatibility

Post by kuze »

mufunyo wrote: October 25th, 2018, 2:49 pm
kuze wrote: October 25th, 2018, 2:29 am Isn't the 2932 the same curvature as 2930/2931/2933/2934?
No. I made the mistake of assuming that once, and experienced the practical result myself. Bezel doesn't fit and it's visibly curvier.
Interesting, TIL!
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2932-S compatibility

Post by nem »

It's curvier and the screen comes out a good bit farther from the frame (maybe half an inch?).
User avatar
Benimaru
Posts: 51
Joined: October 12th, 2018, 8:23 pm
Location: Germany
eBay: extension55
Initials: PDG

Re: Nanao MS2932-S compatibility

Post by Benimaru »

I've learned recently that there are also different bushings for each type of bezel...
Are the ones for the Nanao any different from the ones for the semi curved screen other than in length?
Which length do they have exactly?
Post Reply