A couple of months back the monitor in my Windy suddenly developed what I'd describe as a shimmer to the screen. It looked like interference or bad grounding but the cab hadn't been moved. We removed the flo tube and starter to rule that out. The shimmer would reduce after it warmed up but wouldn't completely go away, then today, this. Any idea?
Toshiba PB6643 issue
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Toshiba PB6643 issue
Sorry to see that. My tube/chassis tech knowledge is limited (nil) so I can't be of much help, but if it turns out to be chassis related, hopefully Yosai or myself can be of assistance as we have a few non working spares between us that could be useful as part donors. Fingers crossed.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Toshiba PB6643 issue
Thanks. I have a spare chassis. Hopefully that works. Do you fix these Grant?
Only other thing I could think of is something loose at the JAMMA harness as the Windy ones are a bit **** like that. Everything seems sound though.
Only other thing I could think of is something loose at the JAMMA harness as the Windy ones are a bit **** like that. Everything seems sound though.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Toshiba PB6643 issue
give it bang on the side of the cab-does it affect it?
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Toshiba PB6643 issue
Nope.
Today it started off with the shimmer but after 5 minutes was all over the shop as per the pic.
Today it started off with the shimmer but after 5 minutes was all over the shop as per the pic.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Toshiba PB6643 issue
could be related to caps, could even be flyback