b&o mx7000 best setup/settings?

[126146]

Hello all! For a while I have B & O MX7000. I have not yet been able to find the ideal setting for the CRT (service mode). Can someone post his settings? Of course I found something on youtube only that is still not the ideal setup for me ... I suspect you have better setup. thank you in advance!

this setup I mean for MX7000:

Rdr
Grr
Rcu
Gcu
Bri
Col
Hfq
Hph
Häm
Vam
Vsc
Vsh
Vli
Ewc
Ewp
Ewt

[nem]

Every monitor will have different settings, there is no one size fits all approach.

Honestly, the only way to do it is to find out what each setting does, put up a test grid from the 240p suite and do it yourself.

[yosai]

^ This.

If you want it to look the best it can you will need to calibrate it yourself.

[thegreathopper]

I have a 7000 old model where I added a button to enter service menu, excellent picture, takes about an hour to get the geometry right but once done write it down as it will be different for each console, I have two settings on mine for SNES and Neo Geo.

[126146]

thanks for your answers! Which setting do you use for the snes?

[thegreathopper]

As above my settings will only work on my TV, if you really want them I will post them later.

[126146]

As above my settings will only work on my TV, if you really want them I will post them later.

if you would like to, yes please