Since I have several issues with games that need me to adjust the HH, HV etc I am wondering wether there is an option for modeling a remote control board for that.
Which could be dangling outside the Blast City chassis so I don't need to move the cab and play inside the chassis all the time.
is there any solution that has been done already?
I could swear I saw something like that.
Remote board for monitor
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Remote board for monitor
What monitor do you have?
You have to regularly adjust horizontal and vertical hold?
You have to regularly adjust horizontal and vertical hold?
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
Re: Remote board for monitor
I have a Nanao MS-2930
I want to adjust the pots on the chassis and check wether Wide or Narrow is set.
maybe with that I can solve some of my frequency etc. issues with several pcbs.
but it's a real pain to stick my arm in there every time. besides it being a bit dangerous when the Blast is live....
so I was wondering if there is an external remote solution to it.
I want to adjust the pots on the chassis and check wether Wide or Narrow is set.
maybe with that I can solve some of my frequency etc. issues with several pcbs.
but it's a real pain to stick my arm in there every time. besides it being a bit dangerous when the Blast is live....
so I was wondering if there is an external remote solution to it.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Remote board for monitor
Honestly, I don't think I've ever adjusted mine.
Anyway, there's no simple solution to your problem. You could wire the two pots to a remote board.
You could also get a different monitor or chassis, one that's not so fussy. Maybe the 2931 would be better for you.
Or you could get a second cab that's adjusted slightly differently.
Anyway, there's no simple solution to your problem. You could wire the two pots to a remote board.
You could also get a different monitor or chassis, one that's not so fussy. Maybe the 2931 would be better for you.
Or you could get a second cab that's adjusted slightly differently.
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
Re: Remote board for monitor
a second cab for those pcbs that don't work on my Blast would be perfect