My 25" monitor started to give me troubles today after not using this cab for months, the issue can be seen in the following video, the picture is all shaky on the sides, it expands and contracts every 10-20 seconds, it gets better after a few minutes with the cab turned on until the problem goes away completely, is this something that can fe fixed by changing all the capacitors, if that's the case, does anyone have a cap list for this model?
see 1:33
My only other option is to ditch this chassis completely and throw a spare MS9 in there as @grantspain once suggested, also according to jomac this model is a POS not worth to repair.
Nanao MS8-25FA
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
- FriedGoat
- Please Continue...
- Posts: 23
- Joined: March 28th, 2018, 11:33 pm
- Location: Uk
- eBay: Friedg0at
Re: Nanao MS8-25FA
I wouldn't mind knowing the answer to this, mine has a very similar issue although mine is more vertical shifting than horizontal!
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Nanao MS8-25FA
the picture is changing both vertically and horizontally in size, this points towards the b+ being slightly unstable- most likely will be a cap or bad solder joint
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: Nanao MS8-25FA
It only changes horizontally, but due the dynamic focus of the camera it might appear that it also changes vertically buts it's just an effect of the camera, I shouldn't have turned the lights off.
- Hieroneus
- Posts: 9
- Joined: April 30th, 2017, 6:02 pm
- Location: Spain
Re: Nanao MS8-25FA
I read use an ms9 chassis? Ms9 chassis works in an 25 inches tube?
Thank you
Thank you
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
- Hieroneus
- Posts: 9
- Joined: April 30th, 2017, 6:02 pm
- Location: Spain
Re: Nanao MS8-25FA
Good to know, i have an ms8-25far, for now is working fine, and i am happy with the image quality, but maybe in the future i could need a working chassis.