Toei TC-A252K Chassis - Toshiba A59JMZ90Z Tube

For monitor related issues
Post Reply
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Toei TC-A252K Chassis - Toshiba A59JMZ90Z Tube

Post by radiantsvgun »

So I have this combo in my neo 25. The chassis has been out for repair for some time. Is there any other toei chassis that would be a direct replacement for this? I've seen a lot of toei chassis pop up lately, but not the TC A252K.
User avatar
Wurstkopp
Mister Dick Statue
Posts: 744
Joined: March 26th, 2009, 6:50 pm
Location: Hamburg, Germany
eBay: nachmittagsprogramm
Initials: NIK

Re: Toei TC-A252K Chassis - Toshiba A59JMZ90Z Tube

Post by Wurstkopp »

I have a A59JMZ90X tube with a Toei TC-HV25LMK in an MVS-U4 running. But it's always best to get the yoke readings and compare them. Here are mine:
Rh - 1,1 ohms
Rv - 7,4 ohms
Lh - 1,6 mH
Lv - 48,1 mH
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Toei TC-A252K Chassis - Toshiba A59JMZ90Z Tube

Post by radiantsvgun »

Thank you! I appreciate it.

I am hoping I can get this chassis situation sorted, if not, I will have to use a wei ya as my last resort.
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Toei TC-A252K Chassis - Toshiba A59JMZ90Z Tube

Post by radiantsvgun »

Was able to get this repaired for the most part. Colors and geometry are wonderful- but the H hold pot needs to be replaced. Anywhere to source them in the USA?
Post Reply