For monitor related issues
zumbito
Posts: 682 Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171
Post
by zumbito » December 20th, 2017, 3:50 pm
I just plugged a replacement chasis to my NAC until I get mine serviced and just found out two things. First the white bleed to the right, I had never seen this before, but it is rather annoying:
Also the RGB screen from a CPS2 looks weird:
Any idea what can cause this?
Rossyra
Supermod
Posts: 7902 Joined: February 12th, 2009, 1:24 am
Location: UK
Post
by Rossyra » December 20th, 2017, 10:50 pm
It looks like interference, try moving the video signal cable around, see if it has any effect. It could also be video ground related.
dos
Please Continue...
Posts: 31 Joined: March 11th, 2016, 4:00 pm
Location: South Florida
eBay: d0sdem0n
Post
by dos » December 21st, 2017, 8:40 am
I had a minor version of this going on and a recap fixed it for me, along with other issues.
Sunder
Please Continue...
Posts: 324 Joined: August 31st, 2017, 12:13 pm
Location: Slovakia
eBay: sunderaj82
Initials: SUN
Post
by Sunder » December 21st, 2017, 11:51 pm
Yeah, definitely needs a recap.
zumbito
Posts: 682 Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171
Post
by zumbito » December 22nd, 2017, 7:58 am
Really? Caps looked quite good. I guess it wont hurt to trying.
Rossyra
Supermod
Posts: 7902 Joined: February 12th, 2009, 1:24 am
Location: UK
Post
by Rossyra » December 22nd, 2017, 8:04 am
TheRedKnight
CNITELIEF
Posts: 3461 Joined: March 19th, 2012, 7:22 am
Location: Finland
eBay: aaaveajajaja
Post
by TheRedKnight » December 22nd, 2017, 9:01 am
It's most definitely hormones.
Emulation's nice when done well
Sunder
Please Continue...
Posts: 324 Joined: August 31st, 2017, 12:13 pm
Location: Slovakia
eBay: sunderaj82
Initials: SUN
Post
by Sunder » December 22nd, 2017, 11:46 am
Do you cut yourself with all that edge sometimes?
copados33
Please Continue...
Posts: 538 Joined: March 20th, 2013, 1:30 pm
Location: Uruguay South America
eBay: psycho-q
Post
by copados33 » January 19th, 2018, 3:51 pm
Had the same problem, fault is in some of the diodes on the neckboard.