MS9 cap problem?
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
MS9 cap problem?
Having tried diffent settings, all corners except one is ok. What could be the cause and correct action to take? Thanks
You do not have the required permissions to view the files attached to this post.
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS9 cap problem?
what game board are you running?
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
Re: MS9 cap problem?
Its mushihimesama futari (PCB)
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS9 cap problem?
does it do the same on another game board
It could be caps but it looks like yoke has slipped or correction magnet falling off
It could be caps but it looks like yoke has slipped or correction magnet falling off
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
Re: MS9 cap problem?
So I tried three different boards, all showing the same issue.
I will check tomorrow for any signs off movement on the yoke or magnets falling off. But correct me, the magnets are not there from factory it would be something added over time to correct distrortion?
I will check tomorrow for any signs off movement on the yoke or magnets falling off. But correct me, the magnets are not there from factory it would be something added over time to correct distrortion?
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
Re: MS9 cap problem?
No signs of movement on the yoke but there is something taped on the tube that could be a magnet. Didn't want to rip it off. Its only on this corner anyway.
Any ideas/suggestions would be gratefully accepted!
Any ideas/suggestions would be gratefully accepted!
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS9 cap problem?
has the monitor always done this or is it a recent fault?
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
Re: MS9 cap problem?
I just bought the cab so I don’t know. It has recently been transported from Japan to Europe, that’s how much I know I’m afraid.
Assuming the problem has been corrected with a magnet and it has gotten worse over time / I’m more picky compared to previous users. Is the underlying problem related to dynamic convergence?
Assuming the problem has been corrected with a magnet and it has gotten worse over time / I’m more picky compared to previous users. Is the underlying problem related to dynamic convergence?
-
- #cavesunday
- Posts: 212
- Joined: April 7th, 2012, 6:00 pm
- Location:
Re: MS9 cap problem?
Looks like the yoke has move and it’s not center
Same thing happened to my capcom impress yoke was a bit loose
Has been fixed now
Same thing happened to my capcom impress yoke was a bit loose
Has been fixed now
- Pelle
- Posts: 13
- Joined: August 28th, 2017, 11:32 am
- Location: Stockholm
- eBay: pewet_81
Re: MS9 cap problem?
Thanks. I will try and re-center the yoke.