ms9 geometry issue
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
ms9 geometry issue
Hi. I have question regarding geometry issue with MS9.
As you can see on picture below, most of pincushions are OK except lower left side.
You can see the length of difference better with this picture.
As you can see, from these pictures, left side of screen is shorter than right side, especially on the bottom. I tried to fix it with pots but with no luck.
Last picture to help to see my geometry.
I really want to fix this issue on ms9 so please help~
Thank you.
As you can see on picture below, most of pincushions are OK except lower left side.
You can see the length of difference better with this picture.
As you can see, from these pictures, left side of screen is shorter than right side, especially on the bottom. I tried to fix it with pots but with no luck.
Last picture to help to see my geometry.
I really want to fix this issue on ms9 so please help~
Thank you.
- crunchywasp
- stompin' an' jumpin'
- Posts: 8080
- Joined: February 10th, 2012, 2:51 pm
- Location: Northern Ireland
- eBay: crunchywasp
- Initials: MAK
Re: ms9 geometry issue
The geometry looks great I reckon. It’s best not to obsess over the test grid or similar patterns - you’ll never get it 100% perfect. Can you even notice when you’re playing a game?
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
Re: ms9 geometry issue
Actually, it does noticeable during a game play. First picture came out better than actual picture. Few inch of bottom right is unable to see it because of difference in length.crunchywasp wrote:The geometry looks great I reckon. It’s best not to obsess over the test grid or similar patterns - you’ll never get it 100% perfect. Can you even notice when you’re playing a game?
Back to the topic, is there any way to fix this?
- Sunder
- Posts: 325
- Joined: August 31st, 2017, 12:13 pm
- Location: Slovakia
- eBay: sunderaj82
- Initials: SUN
Re: ms9 geometry issue
The way I fixed mine is I pushed the yoke back in a little. Had the same problem on mine. It's not so much an ms9 or even a chassis issue here. Sometimes gravity and the elements just does it's thing here.
- Sunder
- Posts: 325
- Joined: August 31st, 2017, 12:13 pm
- Location: Slovakia
- eBay: sunderaj82
- Initials: SUN
Re: ms9 geometry issue
That being said the picture looks great. I wouldn't mess with it too much. Mine was a lot more severe than that.
While playing a beat-em-up, everyone turned into Calista Flockheart when they moved to the right.
While playing a beat-em-up, everyone turned into Calista Flockheart when they moved to the right.
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
Re: ms9 geometry issue
Sunder wrote:The way I fixed mine is I pushed the yoke back in a little. Had the same problem on mine. It's not so much an ms9 or even a chassis issue here. Sometimes gravity and the elements just does it's thing here.
Thank you for your advise. I will try to push the yoke back little bit tonight. Will post result later~
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: ms9 geometry issue
Screw up the screen by janking on the yoke?
The picture is fine, it is not a digital pc monitor but an analogue device. Don't screw it up.
The picture is fine, it is not a digital pc monitor but an analogue device. Don't screw it up.
- Sunder
- Posts: 325
- Joined: August 31st, 2017, 12:13 pm
- Location: Slovakia
- eBay: sunderaj82
- Initials: SUN
Re: ms9 geometry issue
Agreed, just sharing my experience there. I wouldn't screw with it too much like I said before as the picture already looks good.
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
Re: ms9 geometry issue
Last night, I have pushed yoke back little bit as Sunder suggested. Had hard time doing cause it kept coming back to original position. Anyway, I have done it and pretty satisfy with result.
It is not 100% fit as LCD screen but I am sure this is much much better than I posted few days ago.
My great thanks to Sunder.
It is not 100% fit as LCD screen but I am sure this is much much better than I posted few days ago.
My great thanks to Sunder.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: ms9 geometry issue
that is virtually perfect, go get a beer and enjoy
- Sunder
- Posts: 325
- Joined: August 31st, 2017, 12:13 pm
- Location: Slovakia
- eBay: sunderaj82
- Initials: SUN
Re: ms9 geometry issue
Oh man, great work there.