Nanao MS2931 tri-sync + Cave SH3

For monitor related issues
Post Reply
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Nanao MS2931 tri-sync + Cave SH3

Post by zak »

The combo above is not working for me.

When I turn the cab on with an SH3 game plugged in, the game doesn't come on and I can hear the chassis relay clicking constantly.

Has anyone else experienced this? :(
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Nanao MS2931 tri-sync + Cave SH3

Post by zak »

I am using this PSU:

http://www.mouser.co.uk/ProductDetail/M ... FJmg%3D%3D

Every other PCB I have tried works on this cab, just not SH3 or MiniKAB Pi - found here:

http://www.jammaplus.co.uk/forum/forum_ ... -cab-ready
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Nanao MS2931 tri-sync + Cave SH3

Post by zak »

Fixed. I swapped the PSU and it works perfectly now. :)

The one I'm using now is 15amp on 5v line.
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2931 tri-sync + Cave SH3

Post by nem »

Interesting. I would have thought the RT125A could handle SH3 easily. Good to know!
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Nanao MS2931 tri-sync + Cave SH3

Post by zak »

nem wrote:Interesting. I would have thought the RT125A could handle SH3 easily. Good to know!
I guess it would be fine for Superguns?
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2931 tri-sync + Cave SH3

Post by nem »

Not sure why it would fare any better in a supergun? You're just powering the board with it, right?

For the record, I have a RT-125A here. It's a good little unit, but I guess 12A for 5V is exaggerated.
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Nanao MS2931 tri-sync + Cave SH3

Post by zak »

nem wrote:Not sure why it would fare any better in a supergun? You're just powering the board with it, right?

For the record, I have a RT-125A here. It's a good little unit, but I guess 12A for 5V is exaggerated.
Well mine is powering the monitor and the PCB. But I guess the monitor is only using the 12volt line?

Another difference between the RT-125A and the PSU which I put in 2 days ago is the 12v line is rated 3amp on the RT. 4amp on the other generic PSU.

Do you have any SH3 games?
User avatar
RMRM
Posts: 514
Joined: April 20th, 2013, 4:45 pm
Location: Portugal

Re: Nanao MS2931 tri-sync + Cave SH3

Post by RMRM »

zak wrote:Well mine is powering the monitor and the PCB. But I guess the monitor is only using the 12volt line?
Monitor at 12V? I don't think so. Your monitor runs at 110V for sure.
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Nanao MS2931 tri-sync + Cave SH3

Post by zak »

RMRM wrote:
zak wrote:Well mine is powering the monitor and the PCB. But I guess the monitor is only using the 12volt line?
Monitor at 12V? I don't think so. Your monitor runs at 110V for sure.
My bad, I was confusing audio. :awe:
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Nanao MS2931 tri-sync + Cave SH3

Post by nem »

zak wrote:Do you have any SH3 games?
I do, but the PSU is currently in a dedicated racing cab and I'm not going to bother taking it out :awe:

I was going to order a bunch of them, because the RT-125A is one of the few PSUs with a -5V rail that I can buy pretty cheaply in bulk, but maybe I'll hold off for now.
Post Reply