Nanao MS-2934 MS-2932 Tube compatibility
-
- Please Continue...
- Posts: 14
- Joined: February 28th, 2017, 8:15 pm
- Location: Wales
Nanao MS-2934 MS-2932 Tube compatibility
Hi All,
I've got a Nanao MS-2934 with a Toshiba A68KSM696X tube. The mainboard appears fried - . I'm waiting on delivery of a MS-2932 main-board and neck-board I bought online (impulse purchase) and now I'm wondering if it's compatible - anyone know? Are the Dx/Dy specs the same?
Cheers,
Mike.
I've got a Nanao MS-2934 with a Toshiba A68KSM696X tube. The mainboard appears fried - . I'm waiting on delivery of a MS-2932 main-board and neck-board I bought online (impulse purchase) and now I'm wondering if it's compatible - anyone know? Are the Dx/Dy specs the same?
Cheers,
Mike.
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Nanao MS-2934 MS-2932 Tube compatibility
tubes should be identical-if not identical then fully compatible
-
- Please Continue...
- Posts: 14
- Joined: February 28th, 2017, 8:15 pm
- Location: Wales
Re: Nanao MS-2934 MS-2932 Tube compatibility
Cheers Grant, I know they're both 31kHz chassis but I wasn't sure if the slightly different toshiba tube p/n made a difference. Will give it a try when chassis arrives.
Thanks, Mike.
Thanks, Mike.
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
Re: Nanao MS-2934 MS-2932 Tube compatibility
They're not identical-- 2932 is fully curved (A68KJU696X), 2934 is semi-flat (A68KSM696X), but they are compatible as far as I know.grantspain wrote:tubes should be identical-if not identical then fully compatible
-
- Please Continue...
- Posts: 14
- Joined: February 28th, 2017, 8:15 pm
- Location: Wales
Re: Nanao MS-2934 MS-2932 Tube compatibility
Ah that explains the part different Toshiba tube numbers.
Sounds like I'll be good pairing the MS-2932 to my semi-flat tube then
Cheers guys,
Mike.
Sounds like I'll be good pairing the MS-2932 to my semi-flat tube then
Cheers guys,
Mike.
-
- Please Continue...
- Posts: 14
- Joined: February 28th, 2017, 8:15 pm
- Location: Wales
Re: Nanao MS-2934 MS-2932 Tube compatibility
Got the MS-2932 chassis and paired it up to MS-2934S Tube and it works.
Picture is a bit wobbly and degaus coil not being energized but relay clicking so possibly PTC(?)
The chassis looks like its been stored near a beach the amount of corrosion on the jumper wires! Going to give it a good clean on the weekend and recap it.
Otherwise happy days
Picture is a bit wobbly and degaus coil not being energized but relay clicking so possibly PTC(?)
The chassis looks like its been stored near a beach the amount of corrosion on the jumper wires! Going to give it a good clean on the weekend and recap it.
Otherwise happy days
- EveningCommuter
- Please Continue...
- Posts: 21
- Joined: April 17th, 2017, 8:27 am
- Location: Los Angeles, CA, USA
- eBay: SuperGameStorePlus
- Initials: EVN
Re: Nanao MS-2934 MS-2932 Tube compatibility
@PappaLazarou any update on the monitor? Also how did it fit in your cabinet? I plan on getting a Blast City but it has monitor burn and I would like to do a tube swap if possible.
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Nanao MS-2934 MS-2932 Tube compatibility
A Nanao MS-2930 / 31 / 33 / 34 and a Sanwa 29E31S tube will fit a Blast City. A MS8, a MS9 and a MS-2932 will not (unless you want to leave the bezel off).
- EveningCommuter
- Please Continue...
- Posts: 21
- Joined: April 17th, 2017, 8:27 am
- Location: Los Angeles, CA, USA
- eBay: SuperGameStorePlus
- Initials: EVN
Re: Nanao MS-2934 MS-2932 Tube compatibility
Hello Nem,
Now for the Sanwa monitors, are they a perfect fit or have the small gap in the bezel? And I am guessing they are all Tri-Sync?
Now for the Sanwa monitors, are they a perfect fit or have the small gap in the bezel? And I am guessing they are all Tri-Sync?
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Nanao MS-2934 MS-2932 Tube compatibility
It's a perfect fit, yes.
The 29E31S is 31khz only.
The 29E31S is 31khz only.
- EveningCommuter
- Please Continue...
- Posts: 21
- Joined: April 17th, 2017, 8:27 am
- Location: Los Angeles, CA, USA
- eBay: SuperGameStorePlus
- Initials: EVN
Re: Nanao MS-2934 MS-2932 Tube compatibility
Awesome!
I will go ahead and add the Nanao MS-2930 / 31 / 33 / 34 and a Sanwa 29E31S to the list of monitors I am searching for.
I will go ahead and add the Nanao MS-2930 / 31 / 33 / 34 and a Sanwa 29E31S to the list of monitors I am searching for.