Hiya!
How does one connect a jamma board to a 1084S monitor? I see many people using them for testing purposes and I'd like to do the same... So here is the pinout of the 9pin video port at the back:
Is it a simple straight connection using the 1084's R-G-B-C.Sync in analog mode and call it a day?
Commodore 1084S-P1 to jamma , how to connect?
- keropi
- Please Continue...
- Posts: 294
- Joined: January 14th, 2016, 6:04 pm
- Location: Greece
- eBay: sainshov
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK
Re: Commodore 1084S-P1 to jamma , how to connect?
Yes, you might need 75-150 ohm resistors on the rgb lines.
- keropi
- Please Continue...
- Posts: 294
- Joined: January 14th, 2016, 6:04 pm
- Location: Greece
- eBay: sainshov
Re: Commodore 1084S-P1 to jamma , how to connect?
thanks for the info
I already have a 1084S-P1 for my amiga and xt-cga needs , it serves me well. I will try with 75ohm resistors and see where that takes me... I always wanted to make a scart-in adaptor as well so I will make something that combines both with a sync-stripper.
I already have a 1084S-P1 for my amiga and xt-cga needs , it serves me well. I will try with 75ohm resistors and see where that takes me... I always wanted to make a scart-in adaptor as well so I will make something that combines both with a sync-stripper.
-
- Please Continue...
- Posts: 2
- Joined: November 25th, 2020, 9:16 am
- Location: NZ
- eBay: claym0ss
- Initials: TM
Re: Commodore 1084S-P1 to jamma , how to connect?
Can you confirm if this worked with 75 ohm resistors ? I am trying to do the exact same thing thanks
-
- Please Continue...
- Posts: 2
- Joined: November 25th, 2020, 9:16 am
- Location: NZ
- eBay: claym0ss
- Initials: TM
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland