Hi guys
I'm very new to this machine and how it works. Were do I locate this?
I need to change the H/V position so my new MVS board works properly.
Hope you guys can help
Sega New Astro City - Screen calibration?
- 8BiTw0LF
- Please Continue...
- Posts: 9
- Joined: October 19th, 2015, 6:55 pm
- Location: Denmark
- Initials: bit
Sega New Astro City - Screen calibration?
I'm an arcade-padawan - teach me ur Jedi Mind Tricks
-
- Posts: 59
- Joined: July 3rd, 2014, 12:06 pm
- Location:
Re: Sega New Astro City - Screen calibration?
Have you tried opening the control panel?
You do not have the required permissions to view the files attached to this post.
- 8BiTw0LF
- Please Continue...
- Posts: 9
- Joined: October 19th, 2015, 6:55 pm
- Location: Denmark
- Initials: bit
Re: Sega New Astro City - Screen calibration?
OMG...xga wrote:Have you tried opening the control panel?
Thank you!
I'm an arcade-padawan - teach me ur Jedi Mind Tricks
- KennethHansen
- Please Continue...
- Posts: 15
- Joined: February 7th, 2016, 8:19 pm
- Location: Denmark
- Initials: KMH
Re: Sega New Astro City - Screen calibration?
Hope it's alright I bring this back to life.
Just received an AC yesterday, and my first thought was, that this little print was gonna be on the inside of the controlpanel, but there's nothing. Any ideas where it could've been placed?
Just received an AC yesterday, and my first thought was, that this little print was gonna be on the inside of the controlpanel, but there's nothing. Any ideas where it could've been placed?
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: Sega New Astro City - Screen calibration?
Hmmm strange, if your screen is not fubar, it should be connected somewhere. Open your CP and look at the left side of the chassis from there. You should see a flat ribbon cable coming out of there, follow it and you'll find your remote board