chassis swap

[Neo25]

hi i got this screen with sanwa 29e31s chassis

http://www.directupload.net/file/d/3627 ... jj_jpg.htm"

http://www.directupload.net/file/d/3627 ... qf_jpg.htm"

i want to change the chassis to this one:

http://www.directupload.net/file/d/3627 ... bf_jpg.htm"

first question: is the new chhassis compatible?

second question:

the sanwa 29e31s chassis has the following power connector: (as we know from Sega naomi and Blast City)

http://www.directupload.net/file/d/3627 ... el_jpg.htm"


the new chassis has the following power connector:

http://www.directupload.net/file/d/3627 ... 8t_jpg.htm"


what adapter cable do i need ? to make it work in my Blast City ?


thanks a lot !!!

[copados33]

You should contact FrancoB, he is the master of cables.

[rjosal]

You're looking at Amp UP connectors. To make an adapter to connect your Blast City to that chassis I believe you will need:

http://www.digikey.com/product-search/e ... A106912-ND"
http://www.digikey.com/product-detail/e ... ND/3488666"
http://www.digikey.com/product-detail/e ... ND/2233080"

And then for the chassis side:
http://www.digikey.com/product-detail/e ... ND/2055442"
http://www.digikey.com/product-detail/e ... ND/4730301" (looks like they don't stock natural so you'll have to live with red or yellow)
http://www.digikey.com/product-detail/e ... ND/3045315"
http://www.digikey.com/product-detail/e ... ND/3488667"

Now you probably could get away with using all one gauge wire and only need one size of each of the male and female terminals, but typically the AC and degauss leads are 18 or larger gauge while the video leads are 22ish.

That being said, I have no idea if this chassis is compatible with your tube; I think that will come down to yoke specs. grantspain might have a pointer on that topic.