Vewlix Sanwa LCD picture menu

[crunchywasp]

Pressing the 'menu' button on the remote board of the Sanwa LCD brings up the main menu for position adjustment etc as per page 56 of the manual...:



...but Page 57 of the Vewlix manual details a picture menu which I have no idea how to access...



I don't need to tweak the picture but it's handy to know how to access the picture menu if I do in future.

Would anyone be so kind as to shed some light please?

Thanks in advance, much appreciated

[cools]

Hold DOWN and press MENU?

[crunchywasp]

...for 3 seconds?

Of course it is

Press and hold MENU, press DOWN, hold both for a few seconds et voila!

Thanks for that, much appreciated.

*dons dunce's hat and walks slowly, head bowed, into the corner*

[cools]

I missed the 3

[crunchywasp]

If it weren't for your sleuthing, keen eye and common sense I'd have missed it too

[CPS2]

Is it possible to adjust the hori postion on dvi?

[crunchywasp]

I'm afraid I never tried so I'm not sure. Hopefully someone else can confirm.

[Milspex]

What are the best settings for this screen or do you just use factory defaults?

[crunchywasp]

I guess it's subjective but the factory settings looked grand to me. I just adjusted the sharpness and backlight settings upwards a little.

[Milspex]

backlight factory default is 10 though right? I thought that was maximum

[crunchywasp]

Ahh, 10 is max and factory default, yes

From memory the majority of settings were either factory or very close to factory when I got the cab but the backlight was set at around halfway.

[CPS2]

Oddly it looks like only vga will allow you to move the picture.

[crunchywasp]

That is odd. Stupid new-fangled inputs

[CPS2]

That is odd. Stupid new-fangled inputs

Yep, unless there is a hidden, hidden menu then DVI can't be moved horizontally or vertically on the Sanwa.

[Pete]

I think it was like this on my Lind shooter too DVI/Digital was hashed out but it had a auto adjustment feature, I ended up going back to analogue.

[CPS2]

I think it was like this on my Lind shooter too DVI/Digital was hashed out but it had a auto adjustment feature, I ended up going back to analogue.

Thanks Pete.

I've done the same thing. Some TX2 games won't run over DVI anyway.