Hi all, I bought an Astro City a few weeks ago with an MV1-C Neo Geo board in it (Nanao MS9-29 monitor), anyway I hadn't used it for about a week and powered it on today and the display was way over to the left cutting off about 2 inches of the picture.
Just wondering if anyone knows what the problem might be.
Display off centre?
-
- Please Continue...
- Posts: 3
- Joined: November 18th, 2013, 1:29 am
- Location:
- kenth333
- Please Continue...
- Posts: 10
- Joined: October 18th, 2013, 11:28 am
- Location: Finland
- eBay: paavo333
- Initials: KEN
- Contact:
Re: Display off centre?
I'm having the same problem with my cab (crt tv for monitor) and mv1-fzs. Picture shifted to the left ~1-2" and trying to shift it right makes it fold over.
Propably not the same problem as you are having but it'll be nice to see if anyone can provide you with a solution. Maybe it'll fit my problem too. Does yours do this with the mvs only or also other boards and
have you tried adjusting the positioning?
Propably not the same problem as you are having but it'll be nice to see if anyone can provide you with a solution. Maybe it'll fit my problem too. Does yours do this with the mvs only or also other boards and
have you tried adjusting the positioning?
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Display off centre?
You've tried the position controls on the remote board?Deskchair wrote:Hi all, I bought an Astro City a few weeks ago with an MV1-C Neo Geo board in it (Nanao MS9-29 monitor), anyway I hadn't used it for about a week and powered it on today and the display was way over to the left cutting off about 2 inches of the picture.
Just wondering if anyone knows what the problem might be.
-
- Please Continue...
- Posts: 3
- Joined: November 18th, 2013, 1:29 am
- Location:
Re: Display off centre?
I only have the one board so I can't test it on anything else.kenth333 wrote:I'm having the same problem with my cab (crt tv for monitor) and mv1-fzs. Picture shifted to the left ~1-2" and trying to shift it right makes it fold over.
Propably not the same problem as you are having but it'll be nice to see if anyone can provide you with a solution. Maybe it'll fit my problem too. Does yours do this with the mvs only or also other boards and
have you tried adjusting the positioning?
You've tried the position controls on the remote board?yosai wrote:Deskchair wrote:Hi all, I bought an Astro City a few weeks ago with an MV1-C Neo Geo board in it (Nanao MS9-29 monitor), anyway I hadn't used it for about a week and powered it on today and the display was way over to the left cutting off about 2 inches of the picture.
Just wondering if anyone knows what the problem might be.
I haven't yet, I'm pretty new to this (Completely actually) where would I find them?
- kenth333
- Please Continue...
- Posts: 10
- Joined: October 18th, 2013, 11:28 am
- Location: Finland
- eBay: paavo333
- Initials: KEN
- Contact:
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Display off centre?
Open up the control panel and look for a PCB like this. Then adjust the H POS.