yep tried this on a nanao ms2932,results were excellent on 31khz and 24khz but varied on 15khz from ok to poor
the problem was side compression although you may find the blast monitor yoke is a better match
Anyone Tried Replacement 666b Chassis?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Anyone Tried Replacement 666b Chassis?
the yoke of the blast city tube may match the tolerances of the 666b chassis a little better than the nanao therefore you may get less problem at 15khzQuestion from your response- What do you mean when you say the Blast City yoke might be better? If I am replacing just the chassis? I primarily play 15k game boards on these cabs so thats my main concern
this will be a suck it and see job
- thchardcore
- Posts: 153
- Joined: August 19th, 2008, 8:34 am
- Location:
Re: Anyone Tried Replacement 666b Chassis?
I'm in the US and bought one of these. I have no use for it as my tube was too burned for it too matter. I will sell it to you for cheaper than Highway if you want it. I have the box and all the paperwork/cables.
Let me know.
Mike
Let me know.
Mike
15khz upscaled is cheating