Monitor problem in 2D but ok in 3D ! MS29?

For monitor related issues
Post Reply
Nico
Please Continue...
Posts: 33
Joined: September 26th, 2008, 3:07 pm
Location: France
eBay: play_pinball

Monitor problem in 2D but ok in 3D ! MS29?

Post by Nico »

Hello,

i have a problem to fix on my Daytona 2 twin machine. I have a strange thing. it is on 29" 15/24. Running the game is 100% ok but in attrack mode when it is TEXT (well 2D things) the screen is like on the picture on the right, you see nothing....On 2D test menu, all is ok. What you should i do ?

PS : I did the bad guy turning buttons on the chassis and of course i kill a video board of the game...now the game is ok after the video board repair.

Image

Image
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by grantspain »

the screen on the right has a vertical frame collapse
text problems will be related to the model 3 board
User avatar
markedkiller78
Pony fucker
Posts: 7580
Joined: August 17th, 2008, 6:53 pm
Location: Glasgow
eBay: markedkiller78
Initials: MAL

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by markedkiller78 »

obviously I'm **** with monitors, but the same thing happend to mine when I accidently unplugged the remote board from the chassis
Image
capcomguru
Please Continue...
Posts: 418
Joined: August 25th, 2008, 6:43 pm
Location: Boston

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by capcomguru »

markedkiller78 wrote:obviously I'm **** with monitors, but the same thing happend to mine when I accidently unplugged the remote board from the chassis
Seconded. Check the remote board harness and make sure its all the way in on the board and chassis.
Nico
Please Continue...
Posts: 33
Joined: September 26th, 2008, 3:07 pm
Location: France
eBay: play_pinball

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by Nico »

i trade both remotes between 2 monitors...same problem...model3 board 100% ok...i think i should up or down volume but which one on the chassis ?
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by grantspain »

so it is always ok in text mode????
Nico
Please Continue...
Posts: 33
Joined: September 26th, 2008, 3:07 pm
Location: France
eBay: play_pinball

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by Nico »

in menu test, it is ok. but when the game begins "SEGA LOGO"(as on the pic) and "Heat is on blah blah" , it doesn't work" until demo game mode ...
User avatar
grantspain
Tech Head
Posts: 4823
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by grantspain »

eh?this is the strangest fault i have ever heard of :shock:
how could a monitor possibly choose to frame collapse on certain screens :?
anyway looks like a sanwa pm1745 monitor and not nanao-send some more photos of the screen working
Nico
Please Continue...
Posts: 33
Joined: September 26th, 2008, 3:07 pm
Location: France
eBay: play_pinball

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by Nico »

bingo, and i found the manual ;)

it is Sanwa - samsung tube 27Z21C.

To be more specific, in the attrac mode just after the pic i take , the screen can tremble before to reach the state on the pic...
Ordyne
Posts: 72
Joined: October 9th, 2008, 9:09 am
Location: Barnsley, South Yorkshire

Re: Monitor problem in 2D but ok in 3D ! MS29?

Post by Ordyne »

once the screen has gone into collapse does it come back out of collapse if you go into test?

I.E. without powering the machine off and then on again?
Craig Walker • Giz10p • http://www.giz10p.co.uk

Specialists In Amusement Equipment Spares & Repairs
Post Reply