Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

For monitor related issues
Post Reply
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

Hi
Found this combination chassis Sanwa pm1745+ Tube Samsung A68KLV74X01 Burn Free, would it fit Sega New Astro City without any problems ?

Anybody tried that? Looking forward to ur input.

Regards
User avatar
mukurop
Posts: 88
Joined: September 19th, 2008, 11:00 pm
Location: Italy
eBay: mukuro_w

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by mukurop »

Most likely you have to replace the metal frame with the original Nancy one but the Samsung tube you have mentioned have just the same curvature of the toshiba one.
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

Is the neck too long ?
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

Anyone?
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

mukurop wrote: July 20th, 2021, 9:29 pm Most likely you have to replace the metal frame with the original Nancy one but the Samsung tube you have mentioned have just the same curvature of the toshiba one.
Some pics of the neck, according to @grantspain maybe the neck is too long and the fowling the end of cab.

https://ibb.co/N66Lzhy
https://ibb.co/ng6mC4b
https://ibb.co/2kVZ3F7
https://ibb.co/XFNc13J
https://ibb.co/zHh0MTM
https://ibb.co/0Qrz2G1
https://ibb.co/vYC9VRk
User avatar
nem
Posts: 2281
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by nem »

I think the depth will be fine, but you might be disappointed with the image quality. I wouldn't spend the buttload of money you need to ship that thing.
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

Much lower than Toshiba A68KJU96X? Or if I change the the chassis to MS9 29 it will be better image quality?
User avatar
nem
Posts: 2281
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by nem »

Ali710 wrote: July 24th, 2021, 1:55 pmOr if I change the the chassis to MS9 29 it will be better image quality?
Possibly, but you could run in to geometry issues.

Out of interest, how bad is the burn in your NAC?
User avatar
Ali710
Posts: 89
Joined: April 29th, 2019, 9:53 am
Location: Bahrain
eBay: loyalforthegame9
Initials: ALI

Re: Sanwa pm1745+Samsung A68KLV74X01 for Sega NAC

Post by Ali710 »

Here some pics

https://ibb.co/QmfybVq
https://ibb.co/M6j2ZKV
https://ibb.co/0jfBmFK
https://ibb.co/3dQzTn9

Only one very white background noticeable, mostly I don’t notice it
Post Reply