Arcade Otaku - アーケード オタク

Any ideas on a Diaoh PCB anybody?

Monstermug wrote: ↑December 1st, 2020, 12:19 am Any ideas on a Diaoh PCB anybody?

$275 + shipping last June

Yep, that was cheap!

I paid more from Blacklord (shmpus, Tue Mar 13, 2018 4:36 pm).

ROBO84 wrote: ↑November 16th, 2020, 4:58 pm Hi guys,

Any idea on value for a Pink Sweets PCB 2006/04/06 Master ver. and Espgaluda 2003/10/15 Master ver.

Both PCB only no artwork or fancy boxes!

Cheers

Hi Guys, anyone have an idea on the above, need to sell them before I change my mind!!

Pink Sweets ~ $2000
Espgaluda ~ $700 - $750

cocoron wrote: ↑December 4th, 2020, 1:50 pm Pink Sweets ~ $2000
Espgaluda ~ $700 - $750

Nice one, thanks for that chap

1650euro for a loose Pink Sweets PCB ?

Jan wrote: ↑December 5th, 2020, 1:12 pm 1650euro for a loose Pink Sweets PCB ?

Don't know chap, that's why I'm asking! got the two cave PCB's loads of naomi stuff and STV, been out of the game for ages so not much idea what it's all going for these days!

i thought it was ~1500€ these days, but what do i know

Jan wrote: ↑December 5th, 2020, 3:31 pm i thought it was ~1500€ these days, but what do i know

Probably more than me!!

OK, can I get a ballpark valuation on this MVS-U4 25" please?

This is a proper "project cab"

Goods

Has MVIC card reader intact, with non standard but working ribbon cables.
Fairly new Suzo Happ PSU
Nanao MS8 chassis, working well, recently looked at by Grant
Credit LED is working.

Bads

Hitachi Tube is weak, has some burn *CREDIT 00* most prominent in bottom right, displays an OK image but has seen better days
Rust/dings in some areas as per pics
It will need some wiring up and fettling, I've taken the monitor/chassis and swapped them with my canary.
Light box at the top is borked, not the starter at fault or the tube, I also broke the tube, oh and it's currently not wired up.


There is potential here, but needs work.

If I were in the position for that (I'm not), I'd be okay about the £1000 mark. The tube being ropey is a pain.

Jan wrote: ↑December 5th, 2020, 3:31 pm i thought it was ~1500€ these days, but what do i know

Yeah, could be wrong about that one... When you can sell a kit for €2250 here and a bare PCB is listed at TOPS for ¥239,800 which is overpriced imo.
I would guess you can start selling it for about $2000 first. Make a price drop to $1900 or 1800 if nothing happens.

cools wrote: ↑December 6th, 2020, 7:31 am If I were in the position for that (I'm not), I'd be okay about the £1000 mark. The tube being ropey is a pain.

That MVS-U4 should have a Toei chassis I guess .

@matt5cott if you make a video of it running will help people interested to judge how’s the screen

cools wrote: ↑December 6th, 2020, 7:31 am If I were in the position for that (I'm not), I'd be okay about the £1000 mark. The tube being ropey is a pain.

It is yes, which is why I unashamedly swapped it with the canary

Cheers for your input, I'll do a post and start around 1k then.

Rocco wrote: ↑December 6th, 2020, 9:57 am
That MVS-U4 should have a Toei chassis I guess .

@matt5cott if you make a video of it running will help people interested to judge how’s the screen

Yah, I swapped it over with my Canary, the neo screen is in this pic below,

Looks like it needs more colours , contrast ...

Have you tried to set everything like it should ?

If yes , chassis needing service ?

Tube probably just needs a rejuvenation.

nem wrote: ↑December 6th, 2020, 2:49 pm Tube probably just needs a rejuvenation.

Definitely worth a recap first. Just to make sure, before going down that route.

Thanks all, Grant has had the chassis and it's been recapped with nichicons by me, conclusion was tube is a little weak.

I'll put a for sale thread up after dinner

I’m looking for a Konami Vendetta 2 player PCB and ideally (but not essentially) the Asia or uncensored version.

Before I post in ‘wanted’, I wondered if people had any idea how much I should expect to pay...

Ta