Page 407 of 524

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 19th, 2018, 7:04 pm
by Jan
No idea.

Pretty sure most HL Vewlix have been converted to regular Vewlix. Even riverservice offered a kit for that.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 19th, 2018, 8:01 pm
by radiantsvgun
zumbito wrote:Haven´t seen Lindbergh cabs for a while how much do these go nowadays? What about a HL Vewlix? It is really tempting but this things can only play one game...
Lindys in the USA are about $1200 or lower; they're a hard sell since the screens are known for failing. I've never seen a sale on a Half Life VLX, I'd be curious on the price of that too.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 19th, 2018, 9:15 pm
by Jan
also Keep in mind, there are two Screen Revision. Only Rev2 has a Zoom/Fill Option, Rev 1 will give you black borders on Type-X2 Games for example.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 20th, 2018, 2:02 am
by zumbito
Jan wrote:also Keep in mind, there are two Screen Revision. Only Rev2 has a Zoom/Fill Option, Rev 1 will give you black borders on Type-X2 Games for example.
Really? Should typex games be same resolution? Is there any panel that would do for screen replacement?
Jan I guess you have both. Which one would you say is sturdier and better built?

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 20th, 2018, 7:04 am
by Jan
TX2 Games run in 720p.

you mean Lindy vs Vewlix ?

it basicly Comes down to:

- Vewlix can be tated
- the Panel hight of the Vewlix is a bit higher than your usual Candy, while the Lindy has exactly the same hight.
- Spare Parts (i.e. Body Parts, Panels, etc) are easier to source for the Lindy
- the lindy is heavier but more compact
- the vewlix is alot easier and faster to disassemble
- the Rev. 2 original Screen of the Lindy is on par with the Sanwa Screen of the F, if it is working properly
- the Vewlix has a seperate compartment for your game pcb, in general it is imo more accessible
- marquee and movesheet backlight is standart in the Lindy, while it is optional on many Vewlix Cabs

but all in all it is complaining on a vewy high Level. Both are very good cab.

also worth mentioning, the Lindy JVS i/o won`t give you any Trouble, like the one in the Noir.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 20th, 2018, 12:57 pm
by scogon
how much is akai katana art worth? I've got the marquee sheet, instruction sheet and instruction strip which has been snapped and taped together where a normal sticker one would have been folded.

also what is a fair price for a ketsui board?

thx

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 21st, 2018, 8:00 am
by Jan
-Ibara Kuro Kit,good condition, no sticker on the box.

-DFK BL PCB with Art


thx

Ps. No, i‘m Not selling these ;)

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 12:59 pm
by DeusVult
iam thinking of selling the following games, i planned to get a cab at some point but i dont see it happening anytime soon and iam okay playing them on my xbox360

what the going rate for the following

deathsmiles pcb
espgaluda 2 pcb , i think i have the pop art and suction cup thing, not sure about the move strip
Dodonpachi Daifukkatsu 1.5 pcb
ibara pcb

cheers

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 4:11 pm
by RoZioN
IMO
deathsmiles pcb 1k€
espgaluda 2 pcb , 800€
Dodonpachi Daifukkatsu 1.5 pcb 1000€?
ibara pcb dont know

Im looking for a DFK 1.5 board, the price on this board is all over the place though

Help Pricing the following PCB Boards

Posted: April 24th, 2018, 5:14 pm
by SUSANAMARGOT
Truxton Toaplan 1988 Videogame

Football Champ Taito 1990 Videogame

Space Gun Taito 1990 Videogame

Choplifter Sega 1985 Videogame

Ironman Ivan Stewart's Super Off Road Leland 1989 Videogame

Punisher, The Capcom 1993 Videogame COPY

Rolling Thunder Atari Games 1986 Videogame

Rastan Taito 1987 Videogame

Teenage Mutant Ninja Turtles Konami 1989 Videogame

Toki TAD Corporation 1989 Videogame

Cabal TAD Corporation 1988 Videogame

Mortal Kombat Midway Games 1992 Videogame

Sunset Riders Konami 1991 Videogame

Vendetta Konami 1991 Videogame

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 5:19 pm
by Jan
eh... that is bit high for a DS and pretty low for a DFK1.5 :eh:

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 5:40 pm
by phillv85
Deathsmiles: £700-800
Espgaluda 2: £500-600
DFK 1.5: £1000-1200
Ibara: £550-650

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 6:22 pm
by Chempop
Jan wrote:eh... that is bit high for a DS and pretty low for a DFK1.5 :eh:
You should probably buy them all so you can price them as you see fit :wink:

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 24th, 2018, 7:15 pm
by Jan
Na, two of each is enough. :hinthint:





:problem:

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 25th, 2018, 3:50 pm
by geosnow
DFK has the worst sound output of all pcbs in the world. :lol:

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 25th, 2018, 3:53 pm
by monouchi
geosnow wrote:DFK has the worst sound output of all pcbs in the world. :lol:
Try SDOJ. :wtf:

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 26th, 2018, 4:56 am
by kidpanda
monouchi wrote:
geosnow wrote:DFK has the worst sound output of all pcbs in the world. :lol:
Try SDOJ. :wtf:
OMG, that one is horrid. I can't fathom lettting that rip through some speakers.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 26th, 2018, 5:05 am
by EOJ
kidpanda wrote:
monouchi wrote:
geosnow wrote:DFK has the worst sound output of all pcbs in the world. :lol:
Try SDOJ. :wtf:
OMG, that one is horrid. I can't fathom lettting that rip through some speakers.
SDOJ is pretty bad, but when I used to play it in a Japanese arcade I never really noticed because it's so noisy in there anyway. That's probably why Cave never cared to spend a bit more money to make the PCBs output better sound quality.

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 26th, 2018, 5:06 am
by kidpanda
EOJ wrote:SDOJ is pretty bad, but when I used to play it in a Japanese arcade I never really noticed because it's so noisy in there anyway. That's probably why Cave never cared to spend a bit more money to make the PCBs output better sound quality.

The overdriven sound is so bad on that one though, like DFK doesn't sound anywhere near that overdriven. I wonder if it's because of mixing a stereo mix down to mono causes the clip?

Re: You've Got Grail!?? AKA The Valuation Thread

Posted: April 26th, 2018, 5:35 am
by monouchi
kidpanda wrote: The overdriven sound is so bad on that one though, like DFK doesn't sound anywhere near that overdriven. I wonder if it's because of mixing a stereo mix down to mono causes the clip?
Never had any problem with DFK, but when recording SDOJ for a 1cc I first thought there was something wrong with my capture set up.
Though listening to the game on the 360 is a bliss. :)