Page 391 of 525

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:14 pm
by markedkiller78
Jan wrote:DoDonpachi Export Version ? ~600€ ?
Sounds cheap to me. One recently sold for £880 on eBay

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:30 pm
by Jan
wasn`t that a jp version ? :wtf:

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:32 pm
by markedkiller78

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:36 pm
by Jan
:palm:

so , stupid prices beside, what is a fair price ?

it was repaired at some point, a condesator was replaced, works like a charm.

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:44 pm
by markedkiller78
None of it’s fair now.

If you sell for a profit :lolno: it won’t even put a dent in what you’ve been forced to pay for other games.

Edit: if you’re happy with €600, then I doubt a buyer could complain, even after a repair.

Re: You've Got Grail!

Posted: November 23rd, 2017, 12:53 pm
by Jan
i need to check how much i paid, but iirc it was arround 600€.

yeah :lol: , if i`d use it to compensate for what i have paid for MBL, i woul have to offer it for 1600€ :problem:

Re: You've Got Grail!

Posted: November 23rd, 2017, 1:10 pm
by Sunder
Just a question. do you guys consider capacitor changing as devaluing to the pcb? I do that to all my boards just to make sure they last another 20 years.

Re: You've Got Grail!

Posted: November 23rd, 2017, 1:20 pm
by Jan
i don`t, but i mention it because i know there are people who do.

funny storry, i recently offered a New Astro City, very good condition, stunning original MS9 , bright , no burn, perfect geometry.

now , a chap was intressted, so i send me alot of pictures, test picture, picture from the tube turned off with flash, the usual stuff.

but then he asked me to check the chassis if any caps were replaced , i was like :wtf: :wtf: :mad:

there are some odd people out there.

Re: You've Got Grail!

Posted: November 23rd, 2017, 1:30 pm
by markedkiller78
^same here. There was a thread somewhere here on the subject. I think the takeaway was, if you know of, or see any repairs, mention them in the sales thread.

The one thing that worries most people is ongoing corrosive damage caused by leaking acid / alkaline.

New caps are generally a positive in my eyes, a chassis being the big one that sprigs to mind.

Re: You've Got Grail!

Posted: November 23rd, 2017, 1:33 pm
by Sunder
Jan, Tell me you sold it despite the fact. Haha. That is insane.
I'm just imagining a guy running around looking for a mint all original parts Moonwalker PCB now.

Re: You've Got Grail!

Posted: November 23rd, 2017, 1:36 pm
by Sunder
markedkiller78 wrote:^same here. There was a thread somewhere here on the subject. I think the takeaway was, if you know of, or see any repairs, mention them in the sales thread.

The one thing that worries most people is ongoing corrosive damage caused by leaking acid / alkaline.

New caps are generally a positive in my eyes, a chassis being the big one that sprigs to mind.
Yeah I can see and understand that, bought a couple of boards where I had to end up fixing up more stuff on the board after it was bodged up.
Honestly if the repairs were done by a skilled technician, I really wouldn't mind. Unfortunately a lot of the boards I've seen seems to be done by some amateurs.

Re: You've Got Grail!

Posted: November 23rd, 2017, 5:21 pm
by jugemscloud
its interesting now regarding repairs, up until few years ago the cost of a 'professional' to identify and repair a fault would have been at about least 50% of the value of a board for 80%+ of the jamma library hence so many amateur or bodged repairs, as after repair the board would have cost the owner a significant percentage above what would have been average market value at the time and the supply demand was no where near as tight as it now so replacement boards and parts allowed people to attempt this with little financial and time outlays.

I've noticed there are a few people who's work is to significantly high standard and known to the communities do get named if they have done the repairs, and with the older dedicated woodies (1980-95) etc theres tend to be a owner and repair history known post 2000-2005 most of the time. when this is the case it doesn't seem to affect pricing significantly compared to excellent condition or un-repaired examples.

getting pcbs refurbished then sealed with a condition grading, i wouldn't be surprised if this service came about in the next couple of years, and if prices inflated 100%+ across the board then i think inevitable. I'm surprised no-one has attempted to do this with something cave already to be honest

Re: You've Got Grail! With added jugemscloud musings

Posted: November 23rd, 2017, 6:23 pm
by crunchywasp
, , , , ,

^ Here, you can borrow some of mine :whoopsie:

Re: You've Got Grail! With added jugemscloud musings

Posted: November 26th, 2017, 9:06 pm
by Pelle
What is a Raiden Fighters 2 Operation Hell Dive PCB worth nowadays?

Re: You've Got Grail! With added jugemscloud musings

Posted: December 1st, 2017, 11:32 pm
by Grinning Cat
Going rate for a US or Euro Violent Storm PCB?

Re: You've Got Grail! With added jugemscloud musings

Posted: December 2nd, 2017, 9:52 pm
by AxBattler
Grinning Cat wrote:Violent Storm
220€

Re: You've Got Grail! With added jugemscloud musings

Posted: December 2nd, 2017, 10:50 pm
by Grinning Cat
AxBattler wrote:
Grinning Cat wrote:Violent Storm
220€
I did see your FS thread, from September (was one of the few recent sold copies I'd seen). Was 220 EUR what yours sold for in the end?

Re: You've Got Grail! With added jugemscloud musings

Posted: December 3rd, 2017, 2:19 pm
by AxBattler
yep (without shipping)

Re: You've Got Grail! With added jugemscloud musings

Posted: December 3rd, 2017, 4:49 pm
by Grinning Cat
Thanks!

Re: You've Got Grail! With added jugemscloud musings

Posted: December 4th, 2017, 7:45 am
by chomponooch
Hi,
im wondering how much:

- Big Fight (Tatsumi)
- Chopper I (SNK)

are worth nowadays?

Thank you