Jamma Adapters on pcb

Arcade games, artwork, kit pieces...
Forum rules
Sales adverts must include your location, feedback and price. Please read the rules (updated 7th March 2018) before posting or your thread could be deleted!
Topics are automatically pruned after 90 days of inactivity.
Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Jamma Adapters on pcb

Post by Kold666 » July 10th, 2018, 3:24 pm

I am selling some adapters to use classic games on Jamma harness

Capcom Jamma Adapter (for Ghosts and Goblins ,Commando, Gunsmoke,Section Z, Legendary Wings, Avengers, Trojan ) :

Image

Price 20€
5 pieces on stock


IREM Jamma Adapter with possibility to swap push buttons ( Moon Patrol, Kung Fu Master / Spartan X, Spelunker 1 and , Lode Runner, 10 Yard Fight, Kid Niki Radical Ninja, Traverse USA,Tropical Angel, Wily Tower / Atomic Boy)

Image

Price 20€
4 pieces on stock

Namco Jamma Adapter (Xevious,Mappy,Bosconian,Super Pacman,Phozon,Motos,Galaga,Gaplus
Pacland,Dig Dug 1 e 2,Sky Kid,Metro Cross,Toypop,Baraduke,Dragon Buster)

Featuring alternative pacland controls (buttons for directions) and Libble Rabble controls ( double way joystick)

Image

Price 25€
5 pieces on stock

Sega System 1 Jamma Adapter with possibility to swap push buttons.
List of games:
http://www.system16.com/hardware.php?id=693
http://www.system16.com/hardware.php?id=694

Image

Price 20€
2 pieces on stock

Sega System 16/24 Jamma Adapter with configurable push buttons.
List of games:

http://www.system16.com/hardware.php?id=695

http://www.system16.com/hardware.php?id=700

http://www.system16.com/hardware.php?id=701

http://www.system16.com/hardware.php?id=708

Image

Basic Price 25€
5 pieces on stock

With 5€ overprice I can solder the connector and cables for wiring Passing Shot 1P controls which are on a separate board on the pcb
It supports both single joystick play and the original control panel like controls with double joystick
Will send also the instructions where to connect the cables on the original pcb separate board.

Image


Tehkan Jamma Adapter
Bombjack ,Senyjo,Guzzler,Rygar,Star Force,Tank Busters,Meg Force

With Jumper to configurate Bomback/rest of games inputs

Image

Price 25€
6 pieces on stock

1942 / Vulgus Jamma Adapter

Image

Price: 20€
3 pieces on stock


Exerion Jamma Adapter
compatible also with Formation Z / Aerobot and City Connection


Image

Price: 20€
3 items on stock

Falcon Type A Jamma Adapter
compatible with:
Falcon Crazy Kong ( it has two connectors , type A is for the side one)
Phoenix ( with a flying wire modification)
Eyes from Rockola/Zaccaria
Some Sigma games such as Battle Cruiser M-12

IMPORTANT: It is not compatible with Crazy Kong by ORCA.


Image

Price 20€
3 items on stock

Falcon Type B Jamma Adapter
compatible with:

Crush Roller ( with a jumping wire modification )
Kyugo/Crux games such as:
Gyrodine/Buzzard
Sky Lancer
Flashgal
99 Last War / Repulse
Legend



Image

Price: 20€
2 Items on stock

Higemaru Jamma Adapter


Image

Price 20€
3 pieces on stock

Son Son Jamma Adapter

Image

Price: 20€
4 pieces on stock

Konami Jamma Adapter
compatible with all pre jamma Konami games with support up to 3 buttons (Iron Horse).

Possibility to swap 1st/2nd button and to choose alternate button controls for Hyper Olympic/Hyper Sports as found in the original cabinet.

Supports additional right speaker for Gyruss pcb stereo music

Image

Price: 25€
4 pieces on stock


Nichibutsu Jamma Adapter
compatible with Mag Max,Terra Cresta, Dangar Ufo Robot, Cosmo Police Galivan, Mighy Guy


Image

Price: 20€
2 items on stock



SNK Jamma Adapter
Compatible with SNK classic games such as:


Ikari Warriors
Alpha Mission/Arian Mission
TNK3/TANK

Image

Price: 20€
5 items on stock

TECFRI Jamma Adapter
compatible with TECFRI spanish games such as:
Hole Land
Crazy Rally
Sauro
Tricky Doc


Image

Price: 20€
4 Items on stock

Toaplan Jamma Adapter
compatible with Slap Fight,Tiger Heli, Get Star / Guardian and Performan


Image

Price: 20€
3 items on stock

Zaxxon Jamma Adapter
compatible with Zaxxon, Super Zaxxon, Congo Bongo and Future Spy


Image

Price 20€
5 items on stock

Universal Mr.Do! Jamma Adapter with built in amplifier

Compatible with Lady Bug, Mr.Do,Mr.Do Castle, Mr.Do Vs Unicorns, Do Run Run, Mr.Do Wild Ride, Cosmic Avenger


May work with other games or bootlegs but haven't tested.

The adapter comes with inbuilt sound amp with independent Volume / Gain / Bass trimmers for games which don't have a sound amp on board

For Lady Bug which comes with an amp on the pcb, you can switch off the adapter amp and use the lady bug one.
It has also a footprint to solder an external connector in case you want to use an external amplfier of your choice.

Image

Price 35€
5 pieces on stock


DATA EAST Jamma Adapter with possibility to play Karate Champ and Karate Champ Vs
Compatible with:
Karate Champ and Karate Champ VS ( the jumpers selects Jamma 2P player joystick for attacks. Only 1 player is supported for obvious reasons)
Battle Wings
Big Pro Wrestling!
B-Wings
Competition Golf
Ring King
Shootout
Battle Lane Vol. 5
Express Raider


Image

Price 25€
2 items on stock


Escape From The Planets of The Robots Monster Jamma Adapter with circuit to use digital joysticks instead of the original rare and expensive HALL Effect ones

Image

Price 40€
4 items on stock

TAITO classics Jamma Adapter
Compatible with:
Bubble Bobble, Tokio / Scramble Formation, Arkanoid,Elevator Action, Jungle King,Pit Run,Alpine Ski,Front Line,Tin Star,Wild Western,Kick Start
With a set of jumpers you can select single joystick games or double joystick games such as Tin Star, Front Line and Wild Western

Image

Basic price is 35€ and you will get male connector soldered for Arkanoid spinner and the 12 pins power connector needed for all the games ( see picture)

Optionally for 45€ you will get extra harness for Halley Comet pcb

3 items on stock

SNK classics early 80s adapter
Compatible with:
Fantasy,Satan Of Saturn,Sasuke vs. Commander, Nibbler, Vanguard, Pioneer Baloon
With set of Jumpers you can select alternate controls for Vanguard with second joystick to shoot in the 4 directions.

Image

Price 25€
5 items on stock

Taito Samurai / The Alpha Z / Mission 660 / Lady Master of Kung Fu

Image

Price 20 euros
5 items on stock

Technos Jamma Adapter
Compatible with early Technos games such as Eggs, Scramble Eggs, Mysterious Stones, Acrobatic DogFight
Exciting Hour,Mat Mania , probably others

Image

Price 20 euros
5 items on stock

Frisky Tom / Seicross / Radical Radial Jamma Adapter

Image

Price 25 euros
5 items on stock

Spinner Jamma interface multipurpose
Compatible with Taito F3 spinner games ( Puchi Carat, Arkanoid Returns), Suna games ( Goindol, Brick Zone), Sega Nihon games ( Free kick)
Caliber 50 ( using Loop24 joystick), Badlands ( you can play it with a spinner yes!)
Spinner inputs are going to either pin 25/26 or 20/21 so many other games could work using the combination of pulldown resistors ( 2.2K or 10k)
It is tested with a TAITO spinner which doesn't have any pulldown resistors but it can work with any other spinners providing you disable
the pulldown resistors using the jumpers

It supports also Combat School joystick version ( directions are on a separate connector) and Cabal third button ( on the original board
is is wired on the test button)

Image

Price 35 euros
5 items on stock

Nintendo Jamma adapter
Compatible with Donkey Kong ( 2 board ), Donkey Kong Jr. , Mario Bros, Popeye and Donkey Kong 3
The adapter has an inversion circuit on board which is a reproduction of the Hantarex pcb found on Nintendo cabinets imported in Europe.

The adapter has also an amplifier with adjustable volume, gain and bass
Both the inversion circuit and the amplifier can be disabled via jumpers for later nintendo boards which has aldready the circuits installed on the boards.

Image
Image
Image

Price 45 euros for the complete version
Price 25 euros for the basic version without the components installed. In this case can be used ONLY on later revisions nintendo boards with colour inversion and amplifier
on the pcb
4 items on stock


Taito Gladiator: Compatible with Gladiator and Ping Pong King


Image

Price 20€


ADAPTERS ALREADY DESIGNED BUT NOT PRODUCED YET:

DATA EAST Cassette: compatible with all DECO Cassette hw and also with Burning Rubber / Burger Time / Disco No.1 / Zoar / Liberation


Image

Price all assembled including 10 pins edge connector for bottom board: 30€


Alpha Denshi Classics: compatible with Equites, Splendor Blast, High Voltage, Kyros, Super Stingray, Bull Fighter


Image

Price all assembled including additional 6 pins edge connector for sound: 30€


Qbert bootleg jamma adapter with circuit to avoid rotating 45° a standard joystick


Image

Price 25€


Kangaroo jamma adapter for rev.B PCB ( the one more common with the edge connectors)


Image

Price all assembled including 10 pins edge connector for bottom board: 30€




If something is unclear, please drop me a message!

Shipping rate up to two adapters is 13 euros with registered letter for all Europe
Last edited by Kold666 on January 17th, 2019, 2:39 pm, edited 27 times in total.

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 13th, 2018, 1:06 pm

Updated items on stock

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 16th, 2018, 11:15 pm

updated stock list

User avatar
Kretinou
Posts: 772
Joined: December 30th, 2008, 2:45 pm
Location: Switzerland
eBay: Perklorik
Initials: JIC
Contact:

Re: Jamma Adapters on pcb

Post by Kretinou » July 17th, 2018, 9:21 am

For Terra Cresta (original) : possible?

User avatar
Flyingfistofbudha
Posts: 43
Joined: December 8th, 2016, 10:05 pm
Location: U.k.
eBay: Daniels4249
Initials: Dan

Re: Jamma Adapters on pcb

Post by Flyingfistofbudha » July 17th, 2018, 10:19 am

I’m in for one of Tehkan for star force

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 17th, 2018, 10:56 am

Flyingfistofbudha wrote:I’m in for one of Tehkan for star force
MP sent

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 17th, 2018, 10:58 am

Kretinou wrote:For Terra Cresta (original) : possible?
I have already designed and I am waiting for it from the pcb manufacturing company.
After testing it I will update the post.

It will be compatible with Terra Cresta, Dangar, Mag Max, Galivan and so on

Image

User avatar
Kretinou
Posts: 772
Joined: December 30th, 2008, 2:45 pm
Location: Switzerland
eBay: Perklorik
Initials: JIC
Contact:

Re: Jamma Adapters on pcb

Post by Kretinou » July 17th, 2018, 12:28 pm

Great. Consider I'll buy one.

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 28th, 2018, 7:46 pm

updated with many new adapters

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » July 30th, 2018, 5:39 pm

updated items on stock

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » August 2nd, 2018, 6:06 pm

updated stock

RetroMan
Posts: 1
Joined: May 23rd, 2015, 10:43 am
Location: Bournemouth
eBay: wanna_fly

Re: Jamma Adapters on pcb

Post by RetroMan » August 3rd, 2018, 7:52 am

I must say that those jamma adapters look really professional - well done

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » August 3rd, 2018, 10:15 am

Thanks a lot!
Those adapters were done firstly because I wanted good looking adapters for myself but then I found friends interested and I produced some more.

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » September 5th, 2018, 10:06 am

update with new version of Irem, System1 and System16 adapters

new adapters: Falcon type A and Data East

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » September 6th, 2018, 12:33 pm

2x System1 adapter are sold

User avatar
copados33
Posts: 428
Joined: March 20th, 2013, 1:30 pm
Location: Uruguay South America
eBay: psycho-q

Re: Jamma Adapters on pcb

Post by copados33 » September 7th, 2018, 5:07 am

Does your Toaplan to jamma adapter work with japanese Slap Fight pcbs?

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » September 7th, 2018, 11:15 am

Yes, it works for slap fight Japanese, tiger Heli, get star and some other early toaplan games

Alcon, the us Version of Slap fight is already Jamma.
copados33 wrote:
September 7th, 2018, 5:07 am
Does your Toaplan to jamma adapter work with japanese Slap Fight pcbs?

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » September 8th, 2018, 4:39 pm

Added Escape from the planet Jamma Adapter

Rocco
Posts: 319
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Jamma Adapters on pcb

Post by Rocco » September 8th, 2018, 9:08 pm

Do you have a good adapter for Sega Wonderboy to JAMMA ?

Kold666
Posts: 3
Joined: June 3rd, 2016, 11:13 am
Location: Italy
eBay: kold666

Re: Jamma Adapters on pcb

Post by Kold666 » September 8th, 2018, 10:04 pm

Rocco wrote:
September 8th, 2018, 9:08 MP
Do you have a good adapter for Sega Wonderboy to JAMMA ?
yes,
it's this one, compatible with also Wonderboy in Monsterland

Sega System 1 Jamma Adapter with possibility to swap push buttons.
List of games:
http://www.system16.com/hardware.php?id=693
http://www.system16.com/hardware.php?id=694

Image

Post Reply