Page 2 of 5

Re: FS - Repro Marquee Holders

Posted: December 26th, 2018, 10:56 pm
by glocknyne562
Got mine today. Thanks

https://i.ibb.co/2cgHvt8/image.jpg

Re: FS - Repro Marquee Holders

Posted: December 27th, 2018, 11:36 am
by yaourtland
Hi,

I can provide you the specs of Capcom logo on Mini Cute Header but it's not a sticker but printed on it. Possible for you ?

Re: FS - Repro Marquee Holders

Posted: December 27th, 2018, 1:06 pm
by ckong
yaourtland wrote:
December 27th, 2018, 11:36 am
Hi,

I can provide you the specs of Capcom logo on Mini Cute Header but it's not a sticker but printed on it. Possible for you ?
Thx for asking. I can make a Cute header with a Xapcom logo sticker on it, if desired in reverse print (sticker on the backside). Unfortunatley I don't have the equipment to print directly on acrylic.

Re: FS - Repro Marquee Holders

Posted: January 21st, 2019, 1:06 am
by dza
Here is a picture of my Naomi Universal with one of the holders. Sorry I don't have any artwork in it yet. Great transaction. Highly recommended!

Re: FS - Repro Marquee Holders

Posted: January 21st, 2019, 1:12 am
by dza
I don't know what is up with my double attachment. Anyway, here is another shot.

Re: FS - Repro Marquee Holders

Posted: January 22nd, 2019, 3:35 pm
by j69
Nice, I'll be getting one myself when I'm less skint!

Re: FS - Repro Marquee Holders

Posted: January 22nd, 2019, 8:28 pm
by ckong
dza wrote:
January 21st, 2019, 1:06 am
Here is a picture of my Naomi Universal with one of the holders. Sorry I don't have any artwork in it yet. Great transaction. Highly recommended!
Thx for posting the picture, have fun with this nice Candy cab. :)

Re: FS - Repro Marquee Holders

Posted: January 24th, 2019, 9:28 pm
by glocknyne562
I'm one of the few that purchased the vewlix holders. Did anyone else that purchased it have the marquee fit wrong? The measurement was off for mine so one one of the screws is actually in really diagonal and won't get a tight fit. I'll post some pictures in a bit.

Re: FS - Repro Marquee Holders

Posted: January 24th, 2019, 9:57 pm
by RattenJager
MP sent for an Astro City repro marquee holders.

Thks

Re: FS - Repro Marquee Holders

Posted: January 24th, 2019, 11:02 pm
by ckong
glocknyne562 wrote:
January 24th, 2019, 9:28 MP
I'm one of the few that purchased the vewlix holders. Did anyone else that purchased it have the marquee fit wrong? The measurement was off for mine so one one of the screws is actually in really diagonal and won't get a tight fit. I'll post some pictures in a bit.
Please do give the details, maybe via MP. I sold about 6 Vewlix marquee holders so far (not all on this forum) and I didn't got a remark on this yet, so I really would like to know the issue with your marquee holder. :)

Re: FS - Repro Marquee Holders

Posted: January 28th, 2019, 2:37 pm
by ckong
14 kgs of repro marquee holders, to be brought to the local post office and from there they will spread out all over the world.

Image

Re: FS - Repro Marquee Holders

Posted: January 30th, 2019, 8:32 pm
by Zerrminator
MP incoming, going to pick up two!

Re: FS - Repro Marquee Holders

Posted: January 30th, 2019, 11:08 pm
by ckong
Zerrminator wrote:
January 30th, 2019, 8:32 MP
MP incoming, going to pick up two!
:awe:

Re: FS - Repro Marquee Holders

Posted: February 1st, 2019, 8:10 pm
by geldra
One satisfied customer here.

(Haven’t taken the back cellophane protection off the back half, hence the blue hue)

Re: FS - Repro Marquee Holders

Posted: February 3rd, 2019, 3:31 pm
by Rood
Got mine last week and am very very happy!
Super quality and build just like the original.

thanks!
Image

Image

Image

Re: FS - Repro Marquee Holders

Posted: February 3rd, 2019, 4:30 pm
by ckong
Rood wrote:
February 3rd, 2019, 3:31 MP
Got mine last week and am very very happy!
Super quality and build just like the original.

thanks!
You're welcome. :D

Re: FS - Repro Marquee Holders (Vewlix, Astro City, Egret, AWSD, Naomi Universal, (New) Net City)

Posted: February 10th, 2019, 6:12 pm
by RattenJager
Got mine today for my Astro City.
The package was very well protected,that's perfect.
Very happy about them, thanks you very much :-)
I have some space between the 2 layers of plastics on the left and right side (far from the screws) but maybe I didn't have tightened enough the screws.
Hope to order some more from you soon :-)

Image
Image
Image
Image
Image
Image

Re: FS - Repro Marquee Holders (Vewlix, Astro City, Egret, AWSD, Naomi Universal, (New) Net City)

Posted: February 10th, 2019, 10:36 pm
by ckong
You're welcome. And thx for the nice pictures, beautiful artwork BTW. :awe:

Re: FS - Repro Marquee Holders (Vewlix, Astro City, Egret, AWSD, Naomi Universal, (New) Net City)

Posted: February 11th, 2019, 2:04 pm
by RattenJager
ckong wrote:
February 10th, 2019, 10:36 MP
(...)beautiful artwork BTW. :awe:
Thks, i bought it from @Spectre
https://forum.arcadeotaku.com/viewtopic ... 36&t=19380

Re: FS - Repro Marquee Holders (Vewlix, Astro City, Egret, AWSD, Naomi Universal, (New) Net City)

Posted: February 12th, 2019, 3:27 pm
by aaronjmill
Hi there,
Do you plan to do any headers for the Namco Exceleena 2 or Namco Cyberlead? Thanks