[FS] Jamma-Console Interface

Arcade cabinets, control panels, joysticks, harnesses...
Forum rules
Sales adverts must include your location, feedback and price. Please read the rules (updated 1st March 2014) before posting or your thread could be deleted!
User avatar
badwhite40
Posts: 26
Joined: October 11th, 2013, 3:49 pm
Location:

Re: Jamma-Console Interface

Postby badwhite40 » January 11th, 2018, 11:46 am

I am interested too (psx & saturn)
TheLastBandit
Posts: 27
Joined: August 15th, 2013, 10:29 pm
Location:

Re: Jamma-Console Interface

Postby TheLastBandit » January 12th, 2018, 8:22 am

Building and testing new batch at the moment, so can whoever is interested please PM me with the details of what adapters are required and I'll add you to the list.
arcadefanWC
Posts: 4
Joined: January 8th, 2016, 11:42 pm
Location: US

Re: Jamma-Console Interface

Postby arcadefanWC » January 13th, 2018, 12:59 am

Will you be making/selling any 2 Player Padhack DIY interfaces?
Thanks.
TheLastBandit
Posts: 27
Joined: August 15th, 2013, 10:29 pm
Location:

Re: Jamma-Console Interface

Postby TheLastBandit » January 13th, 2018, 12:57 pm

There are no more pad hack adapters required. This is a new version of the board with some upgrades.

Supports up to 8 buttons per player now for Saturn & Playstation
Uses 34 pin IDC connector on Jammacon so an off the shelf cable can be attached if building pad hack adapters.
All adapters now have a cable strain relief

Image

Image

Image

Spares and support for the older design is obviously still available.
User avatar
emphatic
Breastfeeds when required
Posts: 7004
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Jamma-Console Interface

Postby emphatic » January 13th, 2018, 2:42 pm

Lovely design.

Have you considered making a VGA->Scart adapter to make it PC friendly as well? Could compete with J-Pac etc for a full solution. If the discrete inputs are wired to something, does plugging in a console board overide them? :think:
TheLastBandit
Posts: 27
Joined: August 15th, 2013, 10:29 pm
Location:

Re: Jamma-Console Interface

Postby TheLastBandit » January 15th, 2018, 9:32 pm

Not considered making it VGA compatible, like to keep the design as simple as possible and do one job well.

Don't really understand your question regarding the controls ? The control inputs are taken from the jamma edge and the terminal blocks, these inputs are fed to whatever is plugged into the IDC connector.
User avatar
emphatic
Breastfeeds when required
Posts: 7004
Joined: April 7th, 2009, 4:14 pm
Location: Alingsås, Sweden
eBay: jorgen_sjolander
Initials: JOR

Re: Jamma-Console Interface

Postby emphatic » January 16th, 2018, 8:25 pm

TheLastBandit wrote:Not considered making it VGA compatible, like to keep the design as simple as possible and do one job well.

Don't really understand your question regarding the controls ? The control inputs are taken from the jamma edge and the terminal blocks, these inputs are fed to whatever is plugged into the IDC connector.


Terminal blocks are often referred to as discrete inputs (no encoding, just digital+ground).

Return to “Arcade Cabinets & Spares”



Who is online

Users browsing this forum: No registered users