Sold

Arcade cabinets, control panels, joysticks, harnesses...
Topics are pruned after 90 days of inactivity.
Post Reply
User avatar
wigsplitta
Savile's alibi
Posts: 1034
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Sold

Post by wigsplitta » February 6th, 2019, 11:07 am

Couple of my cabs up for sale as I've finally (maybe) got the setup I want. Local pickup preferred so that the buyer can see exactly what they're getting
Martin knows where I live so UK based delivery will be fine too. If I don't have any luck with that, I might open it up to European orders.

Vewlix C
£1500 with Type X2 included
£1250 without
SOLD
This came through the recent g60hot container group buy, and was bought by me with the sole intention of selling it on after i'd swapped the monitor.
To confirm, the VGA port DOES NOT WORK on this cabinet so it is DVI only. Everything else is working nicely, having been checked out by g60hot a couple of weeks back.
It's got a yellowing/sooty appearance on the screen in places that is normal for these monitors. I was thinking of trying to clean it, but never plucked up the courage. Only visible on blank/white screens
In light of the above monitor swap, I'm reducing the price to £1250, OR adding a fully working Taito Type X2 fast IO setup into it, and keeping the price as the same as I paid for it. 8-)
Comes with marquee holder, not pictured.
Missing the coinbox lock
Does not come with a stepdown
Does not come with any illegal games ;) All pictures are to confirm it's working nicely
Free Nesica (Blazblue) Card as a handy way of testing the RFID card reader is working ok in the future if any updates are made
Self made power cable from the Fast IO --> RFID as it was missing
[+] Spoiler...
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Windy 1
£900 SOLD
Clearly visible Battrider burn to tube (screen curvature same as E2/Ac/NAC... so can easily be replace)
Geometry is ok, convergance could do with some tweaking, as could the colours and contrast
Scuffs and scratches, general wear and tear. One of the sides has a fairly large scratch
Internal cabling all good, only a three button setup. I've added a home made amp as it was originally missing
Original control panel, but has some rust and a bit of damage. Instruction strip has some scuff marks too
Missing CP locks, all other are populated with replacement locks/keys
Comes with Repro 1P Alberto panel from a few years back - Colours are way off, based on a file shared a while back. Quality is top notch, as anyone who knows Alberto's work can confirm.
[+] Spoiler...
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
NAC
£400 (no monitor or chassis) SOLD
Fully working as of one week ago, when I swapped it out for a different cab. I have removed the monitor and chassis, and will be keeping them as spares.
Cab is in nice condition overall - it has bumps/scratches, but it has been in use in peoples houses over the last three owners, and has been treated well.
No cracks on the bodywork.
Speaker pod and two of the from doors were repainted before I got it.
Internal wiring is complete, apart from the CPS2 kick harness connector and 6 button connectors.
Original locks. Comes with a FrancoB marquee
[+] Spoiler...
https://i.imgur.com/eDYIDOZ.jpg
https://i.imgur.com/kB9hQN0.jpg
https://i.imgur.com/AnMXfW6.jpg
https://i.imgur.com/2MegQkh.jpg
https://i.imgur.com/pUFCAem.jpg
https://i.imgur.com/jXgyXOQ.jpg
https://i.imgur.com/Nxq78Sh.jpg
https://i.imgur.com/4DljIVn.jpg

SOLD:
Egret II
£900
SOLD
Medium burn to tube, but hard to distinguish anything, unlike the W1 below that less overall burn, but much more specific.
Convergence and Geometry are good, and colours/contrast great.
Scuffs and scratches, general wear and tear. Coin chute got bent on way into the original owners house a few years back, but I've starightened it out to work.
Repro (faded) 1P panel, with 6 button wiring and Negatron jamma adaptor.
Repro intruction strip
Coin box and CP locks missing
Back door panel is include, was taken off in pics to get my Saturn in (not included ;) )
Comes with (Euro style) stepdown transformer
[+] Spoiler...
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Last edited by wigsplitta on February 15th, 2019, 12:27 pm, edited 17 times in total.

User avatar
Jan
“Egrets, I’ve had a few...”
Posts: 3524
Joined: August 17th, 2008, 7:56 pm
Location: Germany
eBay: voll gerne

Re: E2, Windy 1, NAC

Post by Jan » February 6th, 2019, 11:22 am

i`d take the E2 any time if you can pack it.

lionelyo
Posts: 1
Joined: October 7th, 2018, 4:59 pm
Location: France
eBay: lionebegnio
Initials: yo

Re: E2, Windy 1, NAC

Post by lionelyo » February 6th, 2019, 11:55 am

PM egret 2

corn
Posts: 56
Joined: August 18th, 2008, 10:36 pm
Location: Crowthorne, Berks
eBay: corn0873

Re: E2, Windy 1, NAC

Post by corn » February 6th, 2019, 12:04 pm

Interested in the NAC if your other potential buyer isn't.

User avatar
wigsplitta
Savile's alibi
Posts: 1034
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Windy 1, NAC

Post by wigsplitta » February 6th, 2019, 12:16 pm

PMs replied to. E2 SOLD, NAC SOLD.
Last edited by wigsplitta on February 13th, 2019, 11:02 am, edited 2 times in total.

User avatar
Jan
“Egrets, I’ve had a few...”
Posts: 3524
Joined: August 17th, 2008, 7:56 pm
Location: Germany
eBay: voll gerne

Re: Windy 1, NAC

Post by Jan » February 6th, 2019, 12:38 pm

shame, congrats to the buyer

User avatar
kopo
Posts: 29
Joined: February 15th, 2018, 10:40 am
Location: belgium
eBay: none

Re: Windy 1, NAC

Post by kopo » February 6th, 2019, 6:50 pm

Jan wrote:
February 6th, 2019, 12:38 MP
shame, congrats to the buyer
I think you have enough Jan :lol:

User avatar
Jan
“Egrets, I’ve had a few...”
Posts: 3524
Joined: August 17th, 2008, 7:56 pm
Location: Germany
eBay: voll gerne

Re: Windy 1, NAC

Post by Jan » February 6th, 2019, 7:20 pm

Need to make the 20 full :lol:

Gameroom 2.0 in work.

Rocco
Posts: 326
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Windy 1, NAC

Post by Rocco » February 7th, 2019, 9:10 am

Jan wrote:
February 6th, 2019, 7:20 MP
Need to make the 20 full :lol:

Gameroom 2.0 in work.
:awe:

zazi77
Posts: 2
Joined: November 6th, 2015, 8:20 pm
Location: italy

Re: Windy 1, NAC

Post by zazi77 » February 7th, 2019, 10:46 am

damn, everytime an egret pops up I don't check the forum for 2 weeks

User avatar
pubjoe
Fosters Political Ambitions
Posts: 9575
Joined: August 19th, 2008, 8:58 am
Location:

Re: Windy 1, NAC

Post by pubjoe » February 8th, 2019, 9:34 am

Fwiw you had a ten minute window :awe:

Image

User avatar
crunchywasp
stompin' an' jumpin'
Posts: 8733
Joined: February 10th, 2012, 2:51 pm
Location: Fife, Scotland
eBay: crunchywasp
Initials: MAK

Re: Windy 1, NAC

Post by crunchywasp » February 8th, 2019, 12:08 pm

:hoover:

User avatar
wigsplitta
Savile's alibi
Posts: 1034
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Vewlix C, Windy 1

Post by wigsplitta » February 8th, 2019, 3:15 pm

Bumpety for Vewlix C cab added 8-)

g60hot
Posts: 36
Joined: November 11th, 2013, 9:17 pm
Location: Wigan, England
eBay: recycle-squad

Re: Vewlix C, Windy 1

Post by g60hot » February 8th, 2019, 9:49 pm

God I wish I could buy that C back!!

Ps if someone wants to buy the C on its own I’ll have the X2 on its own.

User avatar
Neo'nate
Posts: 410
Joined: August 22nd, 2008, 2:52 pm
Location: London and the SWest
Initials: NJP

Re: Vewlix C, Windy 1

Post by Neo'nate » February 9th, 2019, 11:43 pm

If anyone needs a stepdown PSU give me a hollar

User avatar
wigsplitta
Savile's alibi
Posts: 1034
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Windy 1

Post by wigsplitta » February 11th, 2019, 12:01 pm

Quick bump for a few things I forgot to mention/add, plus price added for cab without the X2 included

Vewlix: SOLD
Comes with official SSF4AE hard drive & dongle (plus the X2 mounting plate that was missing in previous pics)
[+] Spoiler...
Image
Comes with Shadloo 2P F panel - quality is not official Taito (hence why I'm including it for free) but works nicely as a stop gap till an official 2P is tracked down, if required. You'll need to add a second player loom which can be picked up from ebayhere
[+] Spoiler...
Image
Image
Image
Voltages checked to make sure secondary PSU is working correctly
[+] Spoiler...
Image
Image
Image
Only requires a single X2, if anyone was thinking of doing a Fast IO VS setup with a cab they already own, and fancies saving money by not taking the X2 with this cab :hinthint:
[+] Spoiler...
Image
Windy 1: SOLD
Comes with Repro 1P Alberto panel from a few years back.
Colours are way off, based on a file shared a while back. Quality is top notch, as anyone who knows Alberto's work can confirm.
[+] Spoiler...
Image

Post Reply