Tubes / Chassis for Sega Blast Citys

Trying to find something? Request it in here.
Topics are pruned after 90 days of inactivity.
Post Reply
User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 9th, 2019, 7:16 am

Hi! :D

I have quite a few tubes and chassis that have gone bad :(

Always looking for replacements. MS2930s, 32s, Sanwa Ect.

Has anyone used an MS-9 in a Blast City?

Suggestions are welcome

Thanks

Rob

User avatar
mufunyo
Posts: 675
Joined: August 21st, 2008, 12:26 am
Location: Eindhoven, NL
eBay: mufunyo
Initials: MUF

Re: Tubes / Chassis for Sega Blast Citys

Post by mufunyo » May 9th, 2019, 6:21 pm

I have a spare MS2932 chassis and a Sanwa 29E31S chassis, both 31khz only. No tubes unfortunately.

User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Re: Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 9th, 2019, 7:26 pm

Hi

Thanks for the reply, I would consider the Sanwa I currently have a tube and chassis but it "blooms" and falls out out of focus. But I am not sure if it is the tube or the chassis at fault. Any ideas on that?

Rob

User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Re: Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 10th, 2019, 1:27 am

mufunyo wrote:
May 9th, 2019, 6:21 MP
I have a spare MS2932 chassis and a Sanwa 29E31S chassis, both 31khz only. No tubes unfortunately.
Hi

Thanks for the reply, I would consider the Sanwa I currently have a tube and chassis but it "blooms" and falls out out of focus. But I am not sure if it is the tube or the chassis at fault. Any ideas on that?

Rob

User avatar
nem
Posts: 1366
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Tubes / Chassis for Sega Blast Citys

Post by nem » May 10th, 2019, 3:34 pm

The fault is in the flyback on the chassis. It's a common issue. The flyback is a 50 USD part and it takes like 10 minutes to replace with a desoldering station.

User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Re: Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 12th, 2019, 5:19 pm

nem wrote:
May 10th, 2019, 3:34 MP
The fault is in the flyback on the chassis. It's a common issue. The flyback is a 50 USD part and it takes like 10 minutes to replace with a desoldering station.

Hi

I am hoping so, it would be great to have another tube up and running. I am going to look into getting a replacement flyback for that model.

Thanks!

Rob

User avatar
pianela
Posts: 4
Joined: September 8th, 2014, 1:06 pm
Location: Torino - Italy
eBay: pianela
Initials: LIT

Re: Tubes / Chassis for Sega Blast Citys

Post by pianela » May 13th, 2019, 11:58 am

:) Hi,available Sanwa 2932S...

User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Re: Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 15th, 2019, 2:59 am

pianela wrote:
May 13th, 2019, 11:58 am
:) Hi,available Sanwa 2932S...
Thanks! I will send you a message.

Rob

User avatar
RKDE
Posts: 15
Joined: May 8th, 2019, 12:58 am
Location: St. Louis, MO
eBay: agile00
Initials: RWF

Re: Tubes / Chassis for Sega Blast Citys

Post by RKDE » May 15th, 2019, 3:02 am

I do appreciate people replying. Chassis and Tubes are always challenging me. Ugghhhh LOL

Rob

Post Reply