Hi all I'm looking for a full Naomi net boot system that I can just plug and play with, ideally fully loaded...i'm getting lazy in my old age.
Also looking for 2 Capcom I/Os
Let me know what you have.
Cheers all
Naomi net boot set up + 2 Capcom I/O
-
penrhos
- Panel Beater
- Posts: 1451
- Joined: September 11th, 2008, 12:08 pm
- Location: Leicester - UK
- eBay: ngpd002
Re: Naomi net boot set up + 2 Capcom I/O
I'll check over weekend....
-
penrhos
- Panel Beater
- Posts: 1451
- Joined: September 11th, 2008, 12:08 pm
- Location: Leicester - UK
- eBay: ngpd002
Re: Naomi net boot set up + 2 Capcom I/O
I've got 2 working Capcom converters with cables and two of the Black Sega V2 as well.
Naomi-1 or Naomi-2 with 256Mb net-dimm on fw 4.02 and rpi with adafruit screen setup to netboot, only has a few games loaded on the SD-card but I can put a few more on it.
SUN PSU with 2-pin US/JPN power lead fitted.
Don't forget neither jvs-jamma converter outputs enough power to run a net-dimm (only carts) so you'll need to power the Naomi from a JVS PSU.
Naomi-1 or Naomi-2 with 256Mb net-dimm on fw 4.02 and rpi with adafruit screen setup to netboot, only has a few games loaded on the SD-card but I can put a few more on it.
SUN PSU with 2-pin US/JPN power lead fitted.
Don't forget neither jvs-jamma converter outputs enough power to run a net-dimm (only carts) so you'll need to power the Naomi from a JVS PSU.
-
pianela
- Posts: 4
- Joined: September 8th, 2014, 1:06 pm
- Location: Torino - Italy
- eBay: pianela
- Initials: LIT
Re: Naomi net boot set up + 2 Capcom I/O
Hi,available :
Naomi2 Board (Multibios) ready for run alla games all region.
NetDimm 512Mb (firmware 4.01 original SEGA or 4.02 custom)
Pi-Force special version Tft screen colour touch (software totally recompiled with non-free improvements)
Jvs to jamma SEGA
CAPCOM converter
And original PSU SEGA fine Naomi 2 Board (capcom converter not enough if you use a naomi2 + a net dimm.
Little video Pi-Force
https://youtu.be/CX70qL4jgr4