KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Hi there,
I appeal to your knowledge being a beginner in the arcade, I have a CPS2 street fighter 2 anniversary, I connected the CPS2 kick harness to the Konami I/O board but I only have 3 fists and 1 middle foot (button 4)
What should I do to have the other 2 foot buttons knowing that on my terminal when I connect the Atomiswave system, I have the 5 functional buttons.
Are the dipswithcs of the I/O Board to be configured differently? I turned them all off as shown on the arcade otaku site (https://wiki.arcadeotaku.com/w/Konami_J...MA_Adaptor)
I specify that the dipswitch of the panel is configured as the diagram found on the forum indicated in 2L12B? (https://wiki.arcadeotaku.com/w/File:Windy_II_IO_2.jpg)
Thank you in advance for your valuable answers.
I appeal to your knowledge being a beginner in the arcade, I have a CPS2 street fighter 2 anniversary, I connected the CPS2 kick harness to the Konami I/O board but I only have 3 fists and 1 middle foot (button 4)
What should I do to have the other 2 foot buttons knowing that on my terminal when I connect the Atomiswave system, I have the 5 functional buttons.
Are the dipswithcs of the I/O Board to be configured differently? I turned them all off as shown on the arcade otaku site (https://wiki.arcadeotaku.com/w/Konami_J...MA_Adaptor)
I specify that the dipswitch of the panel is configured as the diagram found on the forum indicated in 2L12B? (https://wiki.arcadeotaku.com/w/File:Windy_II_IO_2.jpg)
Thank you in advance for your valuable answers.
- PunkicCyborg
- Posts: 49
- Joined: May 22nd, 2013, 5:29 pm
- Location: Tampa FL
- eBay: evan_labit
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Here's how mine is set for CPS2
12 on
34 off
5 on
678 off
12 on
34 off
5 on
678 off
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Thank you for your information, where should I put this configuration?
on the windy 2 panel? or on the dispswitches of the I/O board Konami JVS to jamma?
or on both (I/O board and panel)
Thanks again.
on the windy 2 panel? or on the dispswitches of the I/O board Konami JVS to jamma?
or on both (I/O board and panel)
Thanks again.
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
do you have a windy 2 ? photos of panel and I/O board is possible ? thanks.
- PunkicCyborg
- Posts: 49
- Joined: May 22nd, 2013, 5:29 pm
- Location: Tampa FL
- eBay: evan_labit
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Yes I have a Windy 2
I am using an irkenlabs JVS to jamma adapters but that shouldn't matter. The control panel I/O board is where you set the dips for the CP layout. There should be a diagram for you in there. Do you have the kick harness adapter cable from the I/O?
I am using an irkenlabs JVS to jamma adapters but that shouldn't matter. The control panel I/O board is where you set the dips for the CP layout. There should be a diagram for you in there. Do you have the kick harness adapter cable from the I/O?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Thanks a lot.
I have I/O board JVS to Jamma Konami (https://www.gamestone.co.uk/gsrcade/arc ... _front.jpg )a kick harness for CPS2.
When I put your config in panel, I have ever the same result ( 3 punch and one kick).
I can't post pictures, how do we do it?
I have I/O board JVS to Jamma Konami (https://www.gamestone.co.uk/gsrcade/arc ... _front.jpg )a kick harness for CPS2.
When I put your config in panel, I have ever the same result ( 3 punch and one kick).
I can't post pictures, how do we do it?
- PunkicCyborg
- Posts: 49
- Joined: May 22nd, 2013, 5:29 pm
- Location: Tampa FL
- eBay: evan_labit
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Do you have the harness from the EX connector off of the I/O board wired to the kick buttons?
if it's easier for you, you can message me on discord @PunkicCyborg#7766 so we can share pics
if it's easier for you, you can message me on discord @PunkicCyborg#7766 so we can share pics
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Thanks, this is more easy, my discord is lanfeust74
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
my discord is lanfeust74#0348
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Did you manage to get this resolved? I can't see any pics of your Konami JVS/JAMMA adapter. Have you definitely got the CPS2 harness connected ok like the pic below?
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
-
- Posts: 8
- Joined: August 13th, 2022, 9:55 am
- Location: FRANCE
- eBay: NO
- Initials: BS
Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2
Hello,
Thank you very much but i solved my problem my problem and the kick harness for my Windy 2 is ok.
Thank you very much but i solved my problem my problem and the kick harness for my Windy 2 is ok.