KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Arcade cabinet hardware and accessories
Post Reply
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

Hi there,

I appeal to your knowledge being a beginner in the arcade, I have a CPS2 street fighter 2 anniversary, I connected the CPS2 kick harness to the Konami I/O board but I only have 3 fists and 1 middle foot (button 4)

What should I do to have the other 2 foot buttons knowing that on my terminal when I connect the Atomiswave system, I have the 5 functional buttons.

Are the dipswithcs of the I/O Board to be configured differently? I turned them all off as shown on the arcade otaku site (https://wiki.arcadeotaku.com/w/Konami_J...MA_Adaptor)

I specify that the dipswitch of the panel is configured as the diagram found on the forum indicated in 2L12B? (https://wiki.arcadeotaku.com/w/File:Windy_II_IO_2.jpg)

Thank you in advance for your valuable answers.
User avatar
PunkicCyborg
Posts: 49
Joined: May 22nd, 2013, 5:29 pm
Location: Tampa FL
eBay: evan_labit

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by PunkicCyborg »

Here's how mine is set for CPS2

12 on
34 off
5 on
678 off
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

Thank you for your information, where should I put this configuration?
on the windy 2 panel? or on the dispswitches of the I/O board Konami JVS to jamma?
or on both (I/O board and panel)
Thanks again.
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

do you have a windy 2 ? photos of panel and I/O board is possible ? thanks.
User avatar
PunkicCyborg
Posts: 49
Joined: May 22nd, 2013, 5:29 pm
Location: Tampa FL
eBay: evan_labit

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by PunkicCyborg »

Yes I have a Windy 2 :)
I am using an irkenlabs JVS to jamma adapters but that shouldn't matter. The control panel I/O board is where you set the dips for the CP layout. There should be a diagram for you in there. Do you have the kick harness adapter cable from the I/O?
You do not have the required permissions to view the files attached to this post.
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

Thanks a lot.

I have I/O board JVS to Jamma Konami (https://www.gamestone.co.uk/gsrcade/arc ... _front.jpg )a kick harness for CPS2.

When I put your config in panel, I have ever the same result ( 3 punch and one kick).

I can't post pictures, how do we do it?
User avatar
PunkicCyborg
Posts: 49
Joined: May 22nd, 2013, 5:29 pm
Location: Tampa FL
eBay: evan_labit

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by PunkicCyborg »

Do you have the harness from the EX connector off of the I/O board wired to the kick buttons?
if it's easier for you, you can message me on discord @PunkicCyborg#7766 so we can share pics
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

Thanks, this is more easy, my discord is lanfeust74
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

my discord is lanfeust74#0348
User avatar
wigsplitta
Savile's alibi
Posts: 1178
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by wigsplitta »

Did you manage to get this resolved? I can't see any pics of your Konami JVS/JAMMA adapter. Have you definitely got the CPS2 harness connected ok like the pic below?

Image
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
Lanfeust74
Posts: 8
Joined: August 13th, 2022, 9:55 am
Location: FRANCE
eBay: NO
Initials: BS

Re: KONAMI WINDY 2 JVS TO JAMMA 6 buttons CPS2

Post by Lanfeust74 »

Hello,

Thank you very much but i solved my problem my problem and the kick harness for my Windy 2 is ok.
Post Reply