Good sources for Japanese power supplies
- system11
- Posts: 390
- Joined: September 21st, 2008, 1:14 pm
- Location: Cambridge, UK
Good sources for Japanese power supplies
I have a "kht50-525/cjs" here from an Irem Madonna that is screwed, annoyingly has 2x straight pin molex connectors for power in & out, any idea where I can get a replacement? First test in years and it was putting out 10v, 8v minimum, turned it up to see what would happen and it just died... Now it comes on for a bit with only trace voltage and dies after about a minute.
Random blog of stuff:
http://blog.system11.org
http://blog.system11.org
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Good sources for Japanese power supplies
I replaced the caps on all of mine, they all work fine now.
- system11
- Posts: 390
- Joined: September 21st, 2008, 1:14 pm
- Location: Cambridge, UK
Re: Good sources for Japanese power supplies
Yeah I recapped it and it came back to life, also had to replace the potentiometer - perhaps that's what made it go bang to begin with.
Random blog of stuff:
http://blog.system11.org
http://blog.system11.org
- Pete
- Retired
- Posts: 4296
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Good sources for Japanese power supplies
If all else fails just buy a Mean Well PSU still widely used in the industry.