I’ve got 2 of these amps, but can’t find any documentation
I can take a guess at
P(4) = Power
S1 = stereo in
S2 = ???
S3 = speaker out (it’s the same connector as the type X zero amp, but not necessarily the same pinout)
Has anyone came across this amp before?
Taito Stereo Amp K91X0799A
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Taito Stereo Amp K91X0799A
You do not have the required permissions to view the files attached to this post.
- geotrig
- Potato!
- Posts: 7534
- Joined: December 5th, 2008, 1:14 pm
- Location: ._.
- eBay: ._.
Re: Taito Stereo Amp K91X0799A
S2 is possibly 12v + ground? ignore me I missed the p for power
<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: Taito Stereo Amp K91X0799A
I’m guessing Geo, based on the thickness of the pins and there are 2 brown and 1 black wire
- geotrig
- Potato!
- Posts: 7534
- Joined: December 5th, 2008, 1:14 pm
- Location: ._.
- eBay: ._.
Re: Taito Stereo Amp K91X0799A
Wouldn't be mono in would it?
<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Taito Stereo Amp K91X0799A
Start looking up datasheets of the ICs on that board and what connectors connect where.
Power is easy enough to verify.
There's no way to control volume on that board?
Power is easy enough to verify.
There's no way to control volume on that board?
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL